Metadata: Identification_Information: Citation: Citation_Information: Originator: Jonathan C. Matti Originator: Douglas M. Morton Originator: Brett F. Cox Originator: Katherine J. Kendrick Publication_Date: 2003 Title: Geologic map and digital database of the Redlands 7.5' quadrangle, San Bernardino and Riverside Counties, California Edition: Version 1.0 Geospatial_Data_Presentation_Form: vector digital data Series_Information: Series_Name: U.S. Geological Survey Open-File Report Issue_Identification: 03-302 Publication_Information: Publication_Place: Menlo Park, California Publisher: U.S. Geological Survey Online_Linkage: http://pubs.usgs.gov/of/2003/0302/ Description: Abstract: The Redlands 7.5' quadrangle is located in the southeastern margin of the San Bernardino Basin, an extensional region situated in a right-step-over zone within the San Andreas Fault system. The quadrangle is traversed by several important fault zones, including: (1) northwest-trending right-lateral strike-slip faults of the San Andreas system (Banning Fault, the Mission Creek and San Bernardino Strands of the San Andreas Fault, the San Jacinto Fault); (2) northeast-trending normal dip-slip faults that have downdropped the San Bernardino Basin; (3) east-trending contractional faults of the San Timoteo Canyon Fault zone. Some of these faults bound distinctive packages of crystalline basement rock. Northwest of the Mission Creek Strand of the San Andreas Fault lies an igneous and metamorphic complex characterized by textural and compositional heterogeneity. This terrane, the Wilson Creek block, is strongly gneissose but includes foliated to massive granitoid rocks intimately intermingled with the gneisses. Thin slices of the gneissose complex have been displaced a few kilometers by the San Bernardino Strand of the San Andreas, the modern trace of the San Andreas Fault in the Redlands quadrangle and elsewhere along the southwest margin of the San Bernardino Mountains. The Mission Creek strand is inferred to lie beneath Quaternary surficial deposits along the southwestern base of the San Bernardino Mountains. This fault is the major strand of the San Andreas Fault zone, has about 100 km of right-slip, and has juxtaposed distinctive crystalline rocks of San Gabriel Mountains-type against the Wilson Creek block and the San Bernardino Mountains. The Banning Fault probably demarcates an important boundary between rocks of San Gabriel Mountains-type to the north and rocks of Peninsular Ranges-type to the south. This hypothesis is difficult to test because outcrops of the two terranes are several miles apart and between them the trace of the Banning Fault must be inferred beneath surficial deposits and beneath the San Timoteo beds of Frick (1921). The rocks of Peninsular Range-type are very different from those of San Gabriel Mountains-type, and consist of massive to foliated granitoids of monzogranitic, granodioritic, and tonalitic composition. Much of the Redlands quadrangle is covered with unconsolidated Quaternary surficial deposits of sand and gravel that have accumulated over the last 600,000 years or so. These are thickest on the modern and ancestral flood plains of the Santa Ana River. In the south part of the quadrangle within the San Timoteo and Reche Canyon drainage systems, Quaternary surficial deposits are less extensive and have distribution patterns determined by displacements on the San Timoteo Canyon Fault zone (reverse faulting) and the San Jacinto Fault (strike-slip faulting). In this region, folded and faulted deposits of the San Timoteo beds of Frick, (1921) formed upwarps and downwarps that influenced the evolution of the landscape and its sedimentary deposits. Digital Data: This geologic database of the Redlands 1:24,000-scale 7.5' quadrangle, San Bernardino and Riverside Counties, California, was prepared by the Southern California Areal Mapping Project (SCAMP), a geoscience project sponsored jointly by the U.S. Geological Survey (USGS) and the California Geological Survey. The database was created in ARC/INFO (Environmental Systems Research Institute), and includes the following files: (1) a readme file, (2) this metadata file, (3) coverages containing geologic-map data and station-location data, (4) associated data tables, (5) a browse graphic of the geologic-map plot and map-marginal explanatory information (.pdf file), (6) a PostScript graphics file of the geologic-map plot with map-marginal explanatory information, and (7) .pdf files describing map units of the Redlands quadrangle (Description of Map Units) and their geologic age and correlation (Correlation of Map Units). Purpose: The geologic database for the Redlands quadrangle was developed as a contribution to the National Cooperative Geologic Mapping Program's National Geologic Map Database, and is intended to provide a general geologic setting of the quadrangle. Geologic information contained in the Redlands database is general-purpose data that are applicable to land-related investigations in the earth and biological sciences. The term "general-purpose" means that all geologic-feature classes have minimal information content adequate to characterize their general geologic characteristics and to interpret their general geologic history. However, no single feature class may have enough information to definitively characterize its properties and origin. For this reason the database cannot be used for site-specific geologic evaluations, although it can be used to plan and guide investigations at the site-specific level. Supplemental_Information: This database is an updated, digital release of an analog map of the Redlands quadrangle released previously in the U.S. Geological Survey Open-File Report (OF) series in 1978 (Morton, 1978). Digital version 1.0 differs from the 1978 analog version in some important ways: 1) Quaternary surficial materials throughout the quadrangle have been reinterpreted based on our analysis of 1938 and 1953 Department of Agriculture (Agricultural Stabilization and Conservation Service, ASCS) aerial photography not examined for the 1978 report. (2) For many faults, digital version 1.0 provides new geologic data and interpretations: (A) we have interpreted the distribution of the Banning Fault in the subsurface; (B) we have re-interpreted the distribution of fault scarps associated with the Redlands and Reservoir Canyon Faults; (C) we have reintepreted the distribution and mutual relations of faults we group into the Live Oak Fault Zone, and ascribed a reverse-fault origin to this complex; (D) we have interpolated the Mission Creek Strand of the San Andreas Fault as a major structure concealed beneath Quaternary surficial deposits along the southwestern base of the San Bernardino Mountains. (3) Digital version 1.0 recognizes localized outcrops of San Bernardino Mountains-type rock in the San Bernardino Basin, between the San Bernardino and Mission Creek Strands of the San Andreas Fault. These rocks are part of the igneous and metamorphic complex of the Wilson Creek block, and are critical evidence for our assertion that the Mission Creek Strand of the San Andreas Fault must lie concealed outboard (southwest) of the outcrops. Morton, D.M., 1978, Geologic map of the Redlands 7.5' quadrangle, California: U.S. Geological Survey Open-File Report 78-21, scale 1:24,000 Time_Period_of_Content: Time_Period_Information: Range_of_Dates/Times: Beginning_Date: 1930 Ending_Date: 1995 Currentness_Reference: Time period of information content for geologic data in the Redlands database reflects (1) the vintage (1930, 1938, 1952, 1966, 1975) of archival aerial photographs used to interpret geologic features and (2) ground observations made by the map authors between 1977 and 2002. Status: Progress: Complete Maintenance_and_Update_Frequency: As Needed Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -117.25009183 East_Bounding_Coordinate: -117.12490817 North_Bounding_Coordinate: 34.12499995 South_Bounding_Coordinate: 33.99998415 Keywords: Theme: Theme_Keyword_Thesaurus: USGS Thesaurus Theme_Keyword: geology Theme_Keyword: geologic maps Theme_Keyword: surficial geologic units Theme_Keyword: bedrock geologic units Theme_Keyword: faulting (geologic) Theme_Keyword: geologic history Theme_Keyword: geologic structure Theme_Keyword: geospatial datasets Theme_Keyword: landslides Theme: Theme_Keyword_Thesaurus: none Theme_Keyword: San Andreas Fault Theme_Keyword: San Jacinto Fault Theme_Keyword: Banning Fault Theme_Keyword: Live Oak Canyon Fault zone Theme: Theme_Keyword_Thesaurus: ISO 19115 Topic Categories Theme_Keyword: geoscientificInformation Place: Place_Keyword_Thesaurus: none Place_Keyword: California Place_Keyword: San Bernardino County Place_Keyword: Riverside County Place_Keyword: Redlands 7.5' quadrangle Place_Keyword: Redlands Place_Keyword: Highland Place: Place_Keyword_Thesaurus: Augmented FIPS 10-4 and FIPS 6-4 Place_Keyword: f06065 = Riverside Place_Keyword: f06071 = San Bernardino Stratum: Stratum_Keyword_Thesaurus: None Stratum_Keyword: San Timoteo beds of Frick (1921) Access_Constraints: None Use_Constraints: The Redlands 7.5' geologic-map database should be used to evaluate and understand the geologic character of the Redlands quadrangle as a whole. It should not be used as a detailed map for purposes of site-specific land-use planning or site-specific geologic evaluations. The database is sufficiently detailed to identify and characterize many actual and potential geologic hazards represented by faults and landslides and posed by ground subsidence and earthquake-generated ground shaking. However, it is not sufficiently detailed for site-specific determinations or evaluations of these features. Faults shown do not take the place of fault-rupture hazard zones designated by the California State Geologist (see Hart, 1988). Use of the Redlands geologic-map database should not violate the spatial resolution of the data. Although the digital form of the data allows the scale to be manipulated at the discretion of the user, detail and accuracy issues that are inherent to map-scale limitations similarly exist in the digital data. The fact that this database was constructed and edited at a scale of 1:24,000 means that higher-resolution data generally are not present in the dataset. Therefore, plotting at scales larger than 1:24,000 will not yield greater real detail, although enlarged plots may reveal fine-scale (artificial) irregularities below the intended resolution of the database. Although the data set may incorporate higher-resolution data at a few places, the resolution of the combined data-base output will be limited by the lower-resolution data. Hart, E.W., 1988, Fault-rupture zones in California; Alquist-Priolo Special Studies Zones Act of 1972 with index to special studies zones maps: California Division of Mines and Geology Special Publication 42 Point_of_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Jonathan C. Matti Contact_Organization: U.S. Geological Survey, Western Region, Earth Surface Processes Team Contact_Position: Project geologist Contact_Address: Address_Type: Mailing address Address: U.S. Geological Survey 520 North Park Avenue, Rm 355 City: Tucson State_or_Province: Arizona Postal_Code: 85719 Country: United States of America Contact_Voice_Telephone: (520) 670-5577 Contact_Facsimile_Telephone: (520) 670-5577 Contact_Electronic_Mail_Address: jmatti@usgs.gov Browse_Graphic: Browse_Graphic_File_Name: http://pubs.usgs.gov/of/2003/0302/images/red_map.gif Browse_Graphic_File_Description: Reduced-size image of the entire map sheet, 475x334 pixels, 56k bytes. Browse_Graphic_File_Type: GIF Browse_Graphic: Browse_Graphic_File_Name: http://pubs.usgs.gov/of/2003/0302/pdf/red_map.pdf Browse_Graphic_File_Description: Navigable portable document format file (.pdf) image of the geologic map, topographic base, Correlation of Map Units, Description of Map Units and key to point and line symbols. Browse_Graphic_File_Type: PDF Data_Set_Credit: Photogrammetric Geologic Compilation: The U.S. Geological Survey's Photogrammetric Plotter Laboratory in Denver, Colorado (James Messerich, photogrammetrist) provided Kern PG-2 stereographic plotters that enabled the high-precision, high-accuracy transfer of geologic linework and point data from aerial photographs to a scale-stable cartographic base. Programmatic Credit: Geologic mapping, topical studies, and digital preparation for this database were sponsored jointly by the following: (1) the U.S. Geological Survey's National Cooperative Geologic Mapping Program and National Earthquake Hazards Program; (2) California Geological Survey; (3) San Bernardino Valley Municipal Water District provided funding support for database development. Scientific Peer Review: The database and plot file benefitted from technical reviews by P. Stone, F.K. Miller, and D. Bedford. Native_Data_Set_Environment: SunOS, 5.7, sun4u UNIX ARC/INFO version 7.2.1 Cross_Reference: Citation_Information: Originator: Jonathan C. Matti Originator: Douglas C. Morton Originator: Brett F. Cox Originator: Scott E. Carson Originator: Thomas J. Yetter Publication_Date: 2003 Title: Geologic map and digital database of the Yucaipa 7.5' Quadrangle, San Bernardino and Riverside Counties, California Edition: Version 1.0 Geospatial_Data_Presentation_Form: vector digital data Series_Information: Series_Name: United States Geological Survey (USGS) Open-File Report Issue_Identification: 03-301 Publication_Information: Publication_Place: Menlo Park, California Publisher: U.S. Geological Survey Online_Linkage: http://pubs.usgs.gov/of/2003/0301/ Data_Quality_Information: Attribute_Accuracy: Attribute_Accuracy_Report: The combination of detailed and reconnaissance techniques used to generate the Redlands quadrangle database has yielded a data set whose quality necessarily varies from location to location. Some areas were examined in great detail in order to solve specific geologic problems or to clarify the description or geologic relations of a particular map unit. Other areas were examined less carefully or were not examined at all. As a result, some parts of the Redlands data set have greater attribute accuracy and represent greater attribute confidence than others. ATTRIBUTE ACCURACY The attribute-accuracy statement for the Redlands database incorporates four elements: (1) map-unit description and attribution, (2) geotechnical standards against which the observations are measured, (3) map-unit identification, and (4) description of linear and planar geologic structures. Map-unit description and attribution: Geologic-map units in the Redlands quadrangle database were described using standard field methods (see Process_Description 1 of 6). Consistent with these methods and consistent with the time available to assemble the data set, the database authors have assigned standard geologic attributes to geologic lines, points, and polygons identified in the database. Geotechnical standards for geologic descriptions: Plutonic rock classification: Plutonic rocks and their deformed equivalents are classified in accordance with the International Union of Geological Sciences Subcommission on the Systematics of Igneous Rocks (1973; Streckeisen, 1976). Sedimentary rock classifications: Sandstones are classified in accordance with the scheme suggested by Friedman and Sanders (1978, Table 7-4). For all sedimentary materials, bedding-thickness classification follows Ingram (1954) and grain-size classification follows Wentworth (1922). Surficial-materials classification: Surficial materials are mapped and classified according to a southern California-wide classification scheme being developed by the Southern California Areal Mapping Project (SCAMP). Terminology for slope-failure deposits (landslides and other slope-failure types) follows Varnes (1978). Color classification: The matrix color of surficial materials and their pedogenic soils is classified according to the Munsell soil-color charts (Munsell, 1975). Bedrock colors also are classified according to the Munsell system, supplemented by the Rock-Color Chart distributed by the Geological Society of America (reprinted 1970). Map-unit identification: Geologic-map units in the Redlands quadrangle represent packages of geologic materials whose overall physical properties differ sufficiently from other such units as to constitute discrete mappable entities. From localities in the quadrangle where map units first were recognized and defined, they were extended to other areas through a mapping process that includes (a) direct outcrop observation, (b) interpretation of subsurface boring logs, and (c) aerial-photographic extrapolation into areas where site observation was not conducted. The coverage red_obs indicates the density of observation and data stations in the Redlands quadrangle, and is a measure of whether a map unit at a particular location was identified on the basis of hands-on data or extrapolation. Map-unit boundaries (geologic contacts) and faults identified along mapping traverses typically were extended laterally by using aerial photographs and binoculars to project or interpolate the contact or fault to its next recorded occurrence along a nearby traverse. Only rarely were individual geologic contacts or fault lines walked out to determine their variability and character throughout the map area. The bounding contacts of surficial units and the location of fault scarps that traverse the units were plotted by using a PG-2 photogrammetric plotter that allows location accuracy equivalent to the accuracy standard for the topographic-contour base. Description geologic structures Geologic structure (planar structure displayed by lines, structure at specific points) in the Redlands quadrangle are described and attributed according to the scheme described by Matti and others (1997a, b). These classifications generally follow conventional schemes for classifying geologic lines and points (Reynolds and others, 1995). ATTRIBUTE CONFIDENCE For version 1.0 of the database, the coverage red_obs is a proxy for attribute confidence: the number of direct observations within a map unit from place to place in the quadrangle proxies for the confidence with which the unit and its attributes are believed to be accurately identified. Future releases of the Redlands data set will delineate a more objective, empirical basis for map-unit identification and attribute accuracy (map-unit and attribute confidence). Friedman, G.M., and Sanders, J.E., 1978, Principles of sedimentology: New York, John Wiley & Sons, 792 p. Ingram, R.L., 1954, Terminology for the thickness of stratification and parting units in sedimentary rocks: Geological Society of America Bulletin, v. 65, p. 937-938. International Union of Geological Sciences Subcommission on the Systematics of Igneous Rocks, 1973, Plutonic rocks: Geotimes, v. 18, no. 10, p. 26-30. Matti, J.C., Powell, R.E., Miller, F.K., Kennedy, S.A., Ruppert, K.R., Morton, G.L., and Cossette, P.M., 1997a, Geologic-line attributes for digital geologic-map databases produced by the Southern California Areal Mapping Project (SCAMP), Version 1.0: U.S.Geological Survey Open-File Report 97-861 Matti, J.C., Miller, F.K., Powell, R.E., Kennedy, S.A., Bunyapanasarn, T.P., Koukladas, Catherine, Hauser, R.M., and Cossette, P.M., 1997b, Geologic-point attributes for digital geologic-map databases produced by the Southern California Areal Mapping Project (SCAMP), Version 1.0: U.S.Geological Survey Open-File Report 97-859 Munsell Color, 1975, Munsell soil color charts, 1975 edition: Baltimore, Maryland, Macbeth Division of Kollmorgen Corporation. Reynolds, M.W., Queen, J.E., and Taylor, R.B., 1995, Cartographic and digital standard for geologic map information: U.S. Geological Survey Open-File Report 95-525 Streckeisen A., 1976, To each plutonic rock its proper name: Earth Science Reviews, v. 12, p. 1-33. Varnes, D.J., 1978, Slope movement types and processes, in Schuster, R.L., and Krizek, R.J., eds., Landslides: analysis and control: Washington, D.C., Transportation Research Board, National Academy of Sciences, Special Report 176, p. 11-33. Wentworth, C.K., 1922, A scale of grade and class terms for clastic sediments: Journal of Geology, v. 30, p. 377-392. Logical_Consistency_Report: Polygon and chain-node topology present. The areal extent of the map is represented digitally by an appropriately projected (Polyconic projection), mathematically generated box. Consequently, polygons intersecting the lines that comprise the map boundary are closed by that boundary. Polygons internal to the map boundary are completely enclosed by line segments that are themselves a set of sequentially numbered coordinate pairs. Point data are represented by coordinate pairs. Completeness_Report: The geologic map and digital database of the Redlands 7.5' quadrangle contain new data that have been subjected to scientific peer review and are a substantially complete representation of the current state of knowledge concerning the geology of the quadrangle. Information for geologic units, geologic contacts, and faults by necessity is generalized. Although derived from data collected at individual observation stations, the characteristics of map units, their bounding contacts, and faults have been averaged and reduced to attributes that describe each map unit and each line element as a whole. This averaging process is necessary because of the intrinsic variability that geologic units, contacts, and faults display spatially: in detail, their characteristics necessarily vary from place-to-place, although certain core attributes persist. To account for this variability and yet still characterize the major defining attributes of geologic entities, the database authors have selected and archived certain geologic characteristics but omitted others. In such cases, details were sacrificed in the interest of defining the average character of the geologic features. Map-unit completeness: For map-unit polygons, version 1.0 of the Redlands database does not exploit the full potential afforded by the data-model and attribute scheme proposed by Matti and others (1997a). The file red_geo.pat contains limited information about polygon themes such as geologic age and the thickness of geologic-map units (where appropriate or where known), as well as information about unique attributes that distinguish a map unit within a polygon or a perticular subset of polygons. Additional lithologic-attribute data are available in the INFO data table red_summ.rel, including age-related data and major rock type. Other than this minimal information, however, the Redlands database for geologic-map units (red_geo) lacks the comprehensive information content of the .pdf files (red_dmu.pdf and red_cmu.pdf). The following data fields in the INFO table red_geo.pat for the geologic-map unit coverage contain no information: THICK: Information about the stratigraphic thickness of geologic units is not included because such information was not obtained for digital version 1.0 of the Redlands quadrangle database. SOURCE: Information about the source of geologic information for geologic map units is not included because in all cases such information for the Redlands database derives from the database authors. Line and Point Completeness: For line and point data, the Redlands database exploits the attribution scheme proposed by Matti and others (1997a,b). This scheme allows geologic elements represented as lines (geologic contacts, faults, fold axes, geomorphic features) and points (bedding orientations, foliation orientations, fault dips) to be assigned a full spectrum of attributes ranging from contact and fault type to geologic age of linear and point features. Some of these attributes are embedded directly within the line and point data bases (.aat and .pat, respectively). Most line and point attributes are stored as codes in two INFO data tables (lines.rel and points.rel). A complete description of the attribute-coding schemes for SCAMP polygon, line, and point data is available in U.S. Geological Survey Open-File Reports OF-97-859, OF-97-860, and OF-97-861 (full source citations follow): Matti, J.C., Powell, R.E., Miller, F.K., Kennedy, S.A., Ruppert, K.R., Morton, G.L., and Cossette, P.M., 1997a, Geologic-line attributes for digital geologic-map databases produced by the Southern California Areal Mapping Project (SCAMP), Version 1.0: U.S. Geological Survey Open-File Report 97-861 http://pubs.usgs.gov/of/1997/0861/ Matti, J.C., Miller, F.K., Powell, R.E., Kennedy, S.A., Bunyapanasarn, T.P., Koukladas, Catherine, Hauser, R.M., and Cossette, P.M., 1997b, Geologic-point attributes for digital geologic-map databases produced by the Southern California Areal Mapping Project (SCAMP), Version 1.0: U.S. Geological Survey Open-File Report 97-859 http://pubs.usgs.gov/of/1997/0859/ Matti, J.C., Miller, F.K., Powell, R.E., Kennedy, S.A., and Cossette, P.M., 1997c, Geologic-polygon attributes for digital geologic-map databases produced by the Southern California Areal Mapping Project (SCAMP), Version 1.0: U.S. Geological Survey Open-File Report 97-860 http://pubs.usgs.gov/of/1997/0860/ Positional_Accuracy: Horizontal_Positional_Accuracy: Horizontal_Positional_Accuracy_Report: Nationwide geologic-map accuracy standards for geologic line and point features have not been developed and adopted by the U.S. Geological Survey and other earth-science entities. Until such standards are developed, the Southern California Areal Mapping Project (SCAMP) uses internal map-accuracy standards for 1:24,000-scale geologic maps produced by the project. In the Redlands 1:24,000 scale quadrangle, geologic lines are judged to meet the map-accuracy standard if they are located to within ±15 meters relative to topographic or cultural features on the base map. Within the database, line data that are judged to meet the map-accuracy standard are denoted in the data table lines.rel by the attribute code .MEE. (meets); line data that may not meet the map-accuracy standard are denoted by the attribute code .MNM. (may not meet). On geologic-map plots and other plots generated from the geologic database, line data that are judged to meet the map-accuracy standard are denoted by solid lines; line data that may not meet the map-accuracy standard are denoted by dashed or dotted lines. In the database and on geologic-map plots, no cartographic device exists for denoting the map-accuracy for geologic-point data (symbols for bedding, foliation, lineations, etc.). Three sources of positional error exist for geologic elements in the Redlands quadrangle database: (1) Positional accuracy of field observations: observation stations (data localities) were located either on aerial photographs or on the topographic basemap of the Redlands quadrangle by referencing hypsographic and planimetric features on the basemap. (2) Transfer of line and point data from aerial photographs to the topographic base: For bedrock geologic materials, point data, contacts and faults were visually transferred to scale-stable copies of the topographic base map. For most surficial geologic materials, geologic contacts and fault scarps were transferred to the base map through the use of a PG-2 sterographic plotter that allows geologic elements to be located with an accuracy and precision equivalent to the standard for the topographic-contour base. (3) Positional fidelity during digital data processing: the maximum transformation Root Mean Square (RMS) error acceptable for 7.5' quadrangle transformation and data input is 0.003 (1.8 meters). The horizontal positional accuracy line and point entities was checked by visual comparison of hard-copy plots with base-stable source data. Lineage: Source_Information: Source_Citation: Citation_Information: Originator: U.S. Geological Survey Publication_Date: 1967, photorevised 1980 Title: Topographic basemap of the Redlands 7.5' quadrangle, southern California Geospatial_Data_Presentation_Form: map Publication_Information: Publication_Place: Reston, Virginia Publisher: U.S. Geological Survey Source_Scale_Denominator: 24000 Type_of_Source_Media: Stable base material (greenline chronoflex for geologic compilation; .007 mil clearfilm blackline for topographic basemap image) Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1967 Source_Currentness_Reference: Topographic basemap Source_Citation_Abbreviation: USGS Redlands, 1967 Source_Contribution: The Redlands topographic basemap served as the reference standard by which the database authors located the position of observation stations and geologic structures (geologic contacts, faults, fold axes). Scale-stable copies of the basemap also were used to transfer geologic information from aerial photographs to basemap using a PG-2 stereographic plotter. Source_Information: Source_Citation: Citation_Information: Originator: Pictorial Crafts, Inc. (contracted to the U.S. Geological Survey) Publication_Date: 1975 Title: Pictorial Crafts aerial photography Source_Scale_Denominator: 24000 Type_of_Source_Media: Paper true-color aerial photographs Source_Time_Period_of_Content: Time_Period_Information: Range_of_Dates/Times: Beginning_Date: 197505 Ending_Date: 197506 Source_Currentness_Reference: Paper true-color aerial photographs Source_Citation_Abbreviation: Pictorial Crafts, Inc., 1975 Source_Contribution: The Pictorial Crafts aerial photography provides true-color rendering of geologic and geomorphic features in the Redlands quadrangle and throughout the San Bernardino Basin. The E-W flight lines were the primary aerial-photography resource used by the authors to locate the position of observation stations and to plot the positions of linear geologic structures (geologic contacts, faults, fold axes). Although their 1975 vintage post-dates urbanization that obscures some geologic features, the photography was helpful in recognizing geologic features whose color is a distinguishing characteristic. Source_Information: Source_Citation: Citation_Information: Originator: U.S. Department of Agriculture, Agricultural Stabilization and Conservation Service Publication_Date: 1952 Title: U.S. Department of Agriculture, Agricultural Stabilization and Conservation Service, 1952 photography (Symbol AXM, AXL) Source_Scale_Denominator: 20000 Type_of_Source_Media: Paper black-and-white aerial photographs Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1952 Source_Currentness_Reference: 1952 date imprint on positive print Source_Citation_Abbreviation: ASCS 1952 photography (Symbol AXM, AXL) Source_Contribution: The ASCS photography provides systematic aerial-photographic cover of the Redlands quadrangle and the rest of the San Bernardino Basin, along N-S flight lines. This orientation contrasts with the typical E-W orientation of most photographic series, and provides a different perspective of geologic and geomorphic features. Because the ASCS photography pre-dates much urbanization that obscures land-form features, it was helpful in recognizing geologic and geomorphic features that have been obliterated by human activities in the last 50 years or so. The database authors used the 1952 ASCS photography to augment and refine observations made using the 1975 Pictorial Crafts photography, and to delineate features in the Redlands municipal area. Source_Information: Source_Citation: Citation_Information: Originator: U.S. Department of Interior, Geological Survey Publication_Date: 1966 Title: U.S. Department of Interior, Geological Survey 1966 photography (symbol GS-VBNS) Source_Scale_Denominator: 30000 (approximately) Type_of_Source_Media: Paper black-and-white aerial photographs Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1966 Source_Currentness_Reference: 1966 date imprint on positive print Source_Citation_Abbreviation: USGS 1966 photography (symbol GS-VBNS) Source_Contribution: The USGS photography (symbol GS-VBNS) provides systematic aerial photographic coverage of the Redlands quadrangle and the rest of the San Bernardino Basin, along E-W flight lines. Although their 1966 vintage post-dates some urbanization that obscures geologic features, moderate vertical exaggeration in this photo series enhances subtle geologic and geomorphic features not easily recognized in other photoseries. The database authors used the 1966 GS-VBNS photography to augment and refine observations made using the 1975 Pictorial Crafts photography. Source_Information: Source_Citation: Citation_Information: Originator: U.S. Department of Agriculture, Agricultural Stabilization and Conservation Service Publication_Date: 1938 Title: U.S. Department of Agriculture, Agricultural Stabilization and Conservation Service, 1938 photography (Symbol AXM, AXL) Source_Scale_Denominator: 20000 Type_of_Source_Media: Paper black-and-white aerial photographs Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1938 Source_Currentness_Reference: 1938 date imprint on positive print Source_Citation_Abbreviation: ASCS 1938 photography (Symbol AXM, AXL) Source_Contribution: The 1938 ASCS photography provides the most regionally extensive early-vintage aerial images available for southern California, including the Redlands quadrangle. The 1938 photography pre-dates much urbanization that obscures land-form features, and thus was helpful in recognizing geologic and geomorphic features that have been obliterated by human activities in the last 60 years or so. The database authors used the 1938 photography to augment and refine observations made using the 1975 Pictorial Crafts photography, and to delineate pre-urbanization features in the northwestern part of the quadrangle. Source_Information: Source_Citation: Citation_Information: Originator: Spence Airplane Photos, Los Angeles (flown under contract to the U.S. Geological Survey) Publication_Date: 1930 Title: Spence aerial photography, 1930 Source_Scale_Denominator: 18000 Type_of_Source_Media: Paper black-and-white aerial photographs Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1930 Source_Currentness_Reference: 1930 date imprint on positive print Source_Citation_Abbreviation: Spence Aerial Photography, 1930 Source_Contribution: The Spence aerial photography consists of a single flight line flown along the San Andreas Fault in southern California, including the Redlands quadrangle. The 1930 photography pre-dates much urbanization that obscures land-form features, and thus was helpful in delineating geologic and geomorphic features (fault scarps, shutter ridges, lineaments) that have been obliterated by human activities in the last 70 years or so. The database authors used the 1930 Spence photography to interpret geomorphic details of the San Andreas Fault Zone (San Bernardino Strand). Source_Information: Source_Citation: Citation_Information: Originator: Morton, D.M. Publication_Date: 1978 Title: Geologic map of the Redlands quadrangle Series_Information: Series_Name: U.S. Geological Survey Open-File Report Issue_Identification: 78-21 Source_Scale_Denominator: 24000 Type_of_Source_Media: stable base material Source_Time_Period_of_Content: Time_Period_Information: Range_of_Dates/Times: Beginning_Date: 1966 Ending_Date: 1977 Source_Currentness_Reference: Publication data Time period of information content for geologic information in the 1978 Redlands quadrangle map reflects (1) the vintage (1966, 1975) of archival aerial photographs used to interpret geologic features and (2) ground observations made by the map author between 1976 and 1977. Source_Citation_Abbreviation: Morton, 1978 Source_Contribution: The 1978 analog geologic map of the Redlands quadrangle is the source of geologic line, point, and map-unit data for many bedrock map units in digital version 1.0. Lithologic, structural, and stratigraphic data for sedimentary deposits of the San Timoteo beds of Frick (1921) are retained, as are boundaries and structural orientations of crystalline bedrock units. Most faults are the same as in the analog version. Process_Step: Process_Description: Field Methods The geologic information contained in the database and on the geologic-map plot was generated by the U.S. Geological Survey using a combination of reconnaissance and detailed mapping techniques. The field data were collected and plotted on aerial photographs and on a 1:24,000-scale basemap (U.S. Geological Survey, 1:24,000 Redlands 7.5' quadrangle, 1967, photorevised, 1980) Bedrock map units were described, mapped, and interpreted on the basis of traverse-mapping methods. Along each traverse, geologic observations are made and recorded at various observation stations whose postitions are stored in the coverage red_obs. Information recorded at these stations provides the basis for the identification and characterization of each bedrock map unit. Map-unit boundaries (geologic contacts) and faults identified along each traverse typically were extended laterally by using aerial photographs and binoculars to project or interpolate the fault or contact to its next recorded occurrence along a nearby traverse. A few sedimentary-layering attitudes were determined through binocular observation rather than from site determinations; these are identified in the database and on the geologic-map plot. Surficial-materials map units were described, mapped, and interpreted on the basis of aerial-photographic interpretation augmented by observation at specific stations. The bounding contacts of each surficial unit and the location of fault scarps that traverse the units were plotted by using a PG-2 photogrammetric plotter that allows location accuracy equivalent to the accuracy standard for the topographic-contour base. The coverage red_obs shows the position of observation stations used to determine geologic characteristics of the surficial map units. Jonathan C. Matti - mapped and interpreted Quaternary surficial materials throughout the Redlands quadrangle; mapped faults of the Live Oak Canyon Fault zone based on aerial-photographic interpretation; Re-interpreted the distribution of the Redlands Fault - 1985-1986, 1988, 1995-1996 Douglas M. Morton – mapped the entire Redlands quadrangle for the 1978 USGS Open-File Report 78-21. For digital v. 1.0, Morton's original Contributions in the following areas are preserved: mapping of the San Jacinto Fault; mapping of crystalline rocks west of the San Jacinto Fault; mapping of sedimentary materials and faults in the San Timoteo Badlands south of San Timoteo Canyon; mapping of crystalline rocks in the northeast corner of the Redlands quadrangle Brett F. Cox - mapped sedimentary materials and faults of the Live Oak Canyon Fault zone on the north side of Live Oak Canyon and San Timoteo Canyon; mapped residual pedogenic soil in the vicinity of the intersection of Live Oak and San Timoteo Canyons - 1980. Katherine J. Kendrick – mapped alluvial deposits and examined and described pedogenic-soil profiles in the vicinity of the mouth of San Timoteo Canyon and in Reche Canyon (see Kendrick, 1996, 1999; Kendrick and others, 1994; Kendrick and others, 2002) Kendrick, K.J., 1996, Descriptions and laboratory analysis for soils in the northern San Timoteo Badlands, California: U.S. Geological Survey Open- File Report 96-93, 6 p. Kendrick, K.J., 1999, Quaternary geologic evolution of the northern San Jacinto fault zone: Understanding evolving strike-slip faults through geomorphic and soil stratigraphic analysis: Riverside, University of California, unpublished Ph.D. dissertation, 301 p. Kendrick, K.J., McFadden, L.D., and Morton, D.M., 1994, Soils and slip rates along the northern San Jacinto fault, in McGill, S.F., and Ross, T.M., eds., Geological investigations of an active margin: Geological Society of America Cordilleran Section Guidebook, Trip No. 8, p. 146-151. Kendrick, K.J., Morton, D.M., Wells, S.G., and Simpson, R.W., 2002, Spatial and temporal deformation along the northern San Jacinto fault, southern California; implications for slip rates: Bulletin of the Seismological Society of America, v. 92, no. 7, pp. 2782-2802. Process_Date: 1977 through 1995 Process_Step: Process_Description: Analog Geologic-map Preparation Methods The digital geologic-map database was produced from geologic linework drafted on a 1:24,000-scale greenline chronoflex of the Redlands 7.5' quadrangle using a 0.18 rapidograph drafting pen. Source materials include: (1) paper field sheets produced by each map author; (2) annotations made by each author on aerial photographs; (3) pencil linework generated by PG-2 stereographic plotter on a scale-stable 1:24,000-scale chronoflex of the Redlands 7.5' quadrangle. The basemap image (red.tif) was prepared by scanning a scale-stable blackline .007-mil clear film of the U.S. Geological Survey, 1:24,000-scale Redlands 7.5' quadrangle topographic map (1967, photorevised, 1980). Scanning was done using an Anatech Eagle 4080 monochrome 800 dots-per-inch scanner at a resolution of 500 dpi. The raster scan was converted to a monochromatic image in ARC/INFO. No elements of the base layer are attributed. The base map is provided for reference only. Process_Date: 1990-1991 Process_Step: Process_Description: Digital Data Capture and Editing Geologic data for the Redlands 7.5' quadrangle were captured in different stages using different techniques. (1) Geologic-line information in the southern third of the quadrangle was digitized and simultaneously converted to ARC/INFO coverages through the application and utilization of the graphical user interface ALACARTE developed by the USGS (Fitzgibbon, 1991; Fitzgibbon and Wentworth, 1991; Wentworth and Fitzgibbon, 1991) running on a Data General Aviion workstation. (2) For the northern two-thirds of the quadrangle, geologic-line information was captured by scanning a scale-stable 0.010-mil clear-film positive of linework drafted by the authors on greenline milar. The clear-film positive was scanned by Optronics, Inc. to produce an 800 DPI raster file, and the raster image was converted to vector format by Optronics, Inc. using proprietary auto-vectorizing software. (3) For the entire quadrangle, geologic-point data were captured using ARC/INFO v. 7.0.4 software using a Sun SPARC20 computer system running Solaris v. 2.4. The database was edited and tagged in ARC/INFO v. 7.0.4 and v. 7.1.1 using a Sun SPARC20 computer system running Solaris v. 2.4. Contributions by Database Editors: Pamela M. Cossette - responsible for editing the vector scan, most geologic database editing, assembling the final database and plot-file products, and metadata production Bradley Jones - responsible for data conversion in the southern part of the quadrangle Stephen A. Kennedy - responsible for database editing in the southern part of the quadrangle Fitzgibbon, T.T., 1991, ALACARTE installation and system manual (version 1.0): U.S. Geological Survey, Open-File Report 91-587B. Fitzgibbon, T.T., and Wentworth, C.M., 1991, ALACARTE user interface - AML code and demonstration maps (version 1.0): U.S. Geological Survey, Open-File Report 91-587A Wentworth, C.M., and Fitzgibbon, T.T., 1991, ALACARTE user manual (version 1.0): U. S. Geological Survey Open-File Report 91-587C Process_Date: 1996-2000 Process_Step: Process_Description: Observation-station coverage red_obs The coverage red_obs contains the locations of observation stations that the dataset authors used to describe geologic materials and geologic structures in the Redlands quadrangle. Several kinds of observation stations are included: (1) Field observations made by the dataset authors. These are represented by the authors name (e.g., Jonathan C. Matti), and the station ID (e.g., JF, J.C. Matti notebook F); (2) Subsurface borings obtained by the California Department of Transportation at overpassing and underpassing rights-of-way along the Interstate and State Highway systems; (3) Subsurface borings obtained by the U.S. Geological Survey's Water Resources Division (WRD) and Geologic Division (Carson and others, 1986); (4) Subsurface borings obtained by various private geotechnical-engineering firms; (5) Soil-profile descriptions obtained by the Natural Resources and Conservation Service (Woodruff and Brock, 1980, sheet 9) Carson, S.E., Matti, J.C., Throckmorton, C.K., and Kelly, M.M., 1986, Stratigraphic and geotechnical data from a drilling investigation in the San Bernardino Valley and vicinity, California: U.S. Geological Survey -Open-File Report 86-225, 83 p., scale 1:48,000. Woodruff, G.A., and Brock, W.Z., 1980, Soil survey of San Bernardino County, southwestern part, California: U.S. Department of Agriculture, Soil Conservation Service, 64 p., scale 1:24,000. Process_Date: 1995-2000 Process_Step: Process_Description: First draft of metadata created by cossette using FGDCMETA.AML ver. 1.2 05/14/98 on ARC/INFO data set /pool5/c/cossette2/j_matti/tucson/red/red_newtopo/red0828 Process_Date: 20000828 Process_Step: Process_Description: Creation of original metadata record Process_Date: 20030729 Process_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey Contact_Person: Pamela M. Cossette Contact_Position: Geographer Contact_Address: Address_Type: mailing address Address: U.S. Geological Survey Room 202 West 904 Riverside Avenue City: Spokane State_or_Province: Washigton Postal_Code: 99201-1087 Country: USA Contact_Voice_Telephone: 509-368-3123 Contact_Facsimile_Telephone: 509-368-3199 Contact_Electronic_Mail_Address: pcossette@usgs.gov Spatial_Data_Organization_Information: Direct_Spatial_Reference_Method: Vector Point_and_Vector_Object_Information: SDTS_Terms_Description: SDTS_Point_and_Vector_Object_Type: Point Point_and_Vector_Object_Count: 816 SDTS_Terms_Description: SDTS_Point_and_Vector_Object_Type: String Point_and_Vector_Object_Count: 2288 SDTS_Terms_Description: SDTS_Point_and_Vector_Object_Type: GT-polygon composed of chains Point_and_Vector_Object_Count: 817 Spatial_Reference_Information: Horizontal_Coordinate_System_Definition: Planar: Map_Projection: Map_Projection_Name: Polyconic Polyconic: Longitude_of_Central_Meridian: -117.1875 Latitude_of_Projection_Origin: 34.00 False_Easting: 0.0 False_Northing: 0.0 Planar_Coordinate_Information: Planar_Coordinate_Encoding_Method: coordinate pair Coordinate_Representation: Abscissa_Resolution: 0.0000001 Ordinate_Resolution: 0.0000001 Planar_Distance_Units: Meters Geodetic_Model: Horizontal_Datum_Name: North American Datum of 1927 Ellipsoid_Name: Clarke 1866 Semi-major_Axis: 6378206.4 Denominator_of_Flattening_Ratio: 294.98 Entity_and_Attribute_Information: Overview_Description: Entity_and_Attribute_Overview: The ARC/INFO version of the Geologic map and digital database of the Redlands 7.5'quadrangle consists of six coverages: >red_geo (geologic map units and geologic-line entities) >red_pts (geologic point features) >red_obs (distribution of data stations) >red_str (anticlinal and synclinal structures) >red_orn (geologic line ornamentation) >red_ldr (map-unit label leaders) Three additional INFO data tables are included in the data set: red_summ.rel (provides general information about each geologic-map unit, including general lithologic features, geologic age, and geologic origin which applies to all polygons of a specified map unit) lines.rel (provides information about geologic features displayed as lines on the map. For a complete description of attributes in lines.rel, refer to USGS Open-File Report 97-861 – see Entity_and_Attribute_Detail_Citation) points.rel (provides information about geologic features displayed as points on the map. for a complete description of attributes in points.rel, refer to USGS Open-File Report 97-859 (see Entity_and_Attribute_Detail_Citation). 1) The coverage red_geo contains information about geologic-map units (represented by polygons) and planar geologic features that bound or break them (e.g. geologic contacts, and faults) represented by lines. The polygons have cartographic and geologic attributes contained in red_geo.pat; the lines have cartographic and geologic attributes contained in red_geo.aat. For display purposes, the geology coverage contains two annotation subclasses: geo contains unit labels, and fault contains formal fault names. 2) The coverage red_pts contains analyzable structural data including information that describes the types and orientation of planar and linear geologic features such as bedding, foliation, fault-plane dip, and fold-hinge plunge. One annotation subclass is included in the geologic points coverage which displays the respective dip and plunge values associated with individual point data. 3) The coverage red_obs contains point data that repesent the locality of data stations associated with multiple authors and sources, all of which have contributed geologic data. The locality data serve several purposes: (1) as a proxy for author confidence in unit identification, (2) as a means of identifying each author's contribution, and (3) as a means of identifying data from sources other than the USGS authors. One annotation subclass, obs, identifies five particular locations: four Natural Resources Conservation Service (NRCS) soil profile description localities and one U.S. Geological Survey Water Resource Division (WRD) well-log data locality. 4) The coverage red_str contains geologic-line data that represent the traces of axial planes for anticlines and synclines. 5) The coverage red_ptsorn stores point data that represent ornamentation for geologic lines (e.g. strike slip arrows, bar and ball on down-thrown block, etc.) 6) The coverage red_ldr contains annotation leaders that point to unit labels that are placed outside the perimeter of a particular geologic polygon. These cartographic line entities are attributed with only a single attribute, L-SYMB, and all have the same value, 1. Entity_and_Attribute_Detail_Citation: A complete description of the polygon, line, and point data coding schemes is available in U.S. Geological Survey Open-File Reports OF-97-859, OF-97-860, and OF-97-861 (full source citations follow): Matti, J.C., Miller, F.K., Powell, R.E., Kennedy, S.A., Bunyapanasarn, T.P., Koukladas, Catherine, Hauser, R.M., and Cossette, P.M., 1997b, Geologic-point attributes for digital geologic-map databases produced by the Southern California Areal Mapping Project (SCAMP), Version 1.0: U.S.Geological Survey Open-File Report 97-859 Matti, J.C., Miller, F.K., Powell, R.E., Kennedy, S.A., and Cossette, P.M., 1997c, Geologic-polygon attributes for digital geologic-map databases produced by the Southern California Areal Mapping Project (SCAMP), Version 1.0: U.S.Geological Survey Open-File Report 97-860 Matti, J.C., Powell, R.E., Miller, F.K., Kennedy, S.A., Ruppert, K.R., Morton, G.L., and Cossette, P.M., 1997a, Geologic-line attributes for digital geologic-map databases produced by the Southern California Areal Mapping Project (SCAMP), Version 1.0: U.S.Geological Survey Open-File Report 97-861 Detailed_Description: Entity_Type: Entity_Type_Label: red_geo.pat Entity_Type_Definition: Geologic units shown on geologic map in Postscript (.ps) and Portable Document Format (.pdf) files Attribute: Attribute_Label: TAG Attribute_Definition: A reference label for subgroups of polygons of the geologic-map unit identified by LABL. Every polygon subgroup has certain attributes in common with all other polygons of the map unit, but each subgroup has unique, distinguishing attributes that warrant recognition in the database although they do not provide a basis for recognizing new map units (for example, geographic variations in properties such as grain size, thickness, and clast compositiion). TAG serves one additional purpose: it functions as the relate item that associates each polygon with its attributes stored in the polygon-attribute data table, RED_SUMM.REL. TAG is defined as LABL followed by an upper-case letter, e.g., QwA, QwB, or QwC, etc. Most map units in the Redlands databse have only one TAG designation, TAG A; map units having polygon subsets representing characteristics sufficiently distinct from those of the overall unit include: Qw (QwA, QwB), Qw1 (Qw1A, Qw1B), Qw2 (Qw2A, Qw2B), Qya1 (Qya1A, Qya1B), Qya3 (Qya3A, Qya3B, Qya3C), Qya5 (Qya5A, Qya5B), Qvof3 (Qvof3A, Qvof3C). Attribute: Attribute_Label: LABL Attribute_Definition: Geologic map unit label. Plain text is substituted for specialized geologic age symbols. Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Kgd Enumerated_Domain_Value_Definition: Granodiorite Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Kmg Enumerated_Domain_Value_Definition: Monzogranite Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Kmgt Enumerated_Domain_Value_Definition: Monzogranite and Tonalite, undivided Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Kt Enumerated_Domain_Value_Definition: Tonalite Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Kt1 Enumerated_Domain_Value_Definition: Tonalite, unit 1 Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Mzfg Enumerated_Domain_Value_Definition: Foliated granitoid rock Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: QTstcq Enumerated_Domain_Value_Definition: San Timoteo beds of Frick (1921), quartzite-bearing conglomerate member Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: QTstrl Enumerated_Domain_Value_Definition: San Timoteo beds of Frick (1921), ripple-laminated member Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: QTstr Enumerated_Domain_Value_Definition: San Timoteo beds of Frick (1921), Reche Canyon member Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: QTstu Enumerated_Domain_Value_Definition: San Timoteo beds of Frick (1921), upper member Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Qvya Enumerated_Domain_Value_Definition: Very young axial-valley deposits (latest Holocene) Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Qvyf Enumerated_Domain_Value_Definition: Very young alluvial-fan deposits (latest Holocene) Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Qvyls Enumerated_Domain_Value_Definition: Very young landslide deposits (latest Holocene) Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Qof Enumerated_Domain_Value_Definition: Old alluvial-fan deposits Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Qof2 Enumerated_Domain_Value_Definition: Old alluvial-fan deposits, Unit 2 Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Qof3 Enumerated_Domain_Value_Definition: Old alluvial-fan deposits, Unit 3 Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Qols Enumerated_Domain_Value_Definition: Old landslide deposits Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Qvoa3 Enumerated_Domain_Value_Definition: Very old axial-valley deposits, Unit 3 Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Qvof1 Enumerated_Domain_Value_Definition: Very old deposits of alluvial fans, Unit 1 Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Qvof2 Enumerated_Domain_Value_Definition: Very old alluvial-fan deposits, Unit 2 Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Qvof3 Enumerated_Domain_Value_Definition: Very old alluvial-fan deposits, Unit 3 Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Qvor Enumerated_Domain_Value_Definition: Very old residuum or pedogenic soil Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Qvos Enumerated_Domain_Value_Definition: Very old surficial deposits, undifferentiated Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Qvyw Enumerated_Domain_Value_Definition: Very young wash deposits, active (latest Holocene) Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Qvyw1 Enumerated_Domain_Value_Definition: Very young wash deposits, Unit 1 (latest Holocene) Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Qvyw2 Enumerated_Domain_Value_Definition: Very young wash deposits, Unit 2 (latest Holocene) Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Qya1 Enumerated_Domain_Value_Definition: Young axial-valley deposits, Unit 1 Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Qya3 Enumerated_Domain_Value_Definition: Young axial-valley deposits, Unit 3 Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Qya4 Enumerated_Domain_Value_Definition: Young axial-valley deposits, Unit 4 Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Qya5 Enumerated_Domain_Value_Definition: Young axial-valley deposits, Unit 5 Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Qyf Enumerated_Domain_Value_Definition: Young alluvial-fan deposits Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Qyf1 Enumerated_Domain_Value_Definition: Young alluvial-fan deposits, Unit 1 Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Qyf3 Enumerated_Domain_Value_Definition: Young alluvial-fan deposits, Unit 3 Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Qyf4 Enumerated_Domain_Value_Definition: Young alluvial-fan deposits, Unit 4 Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Qyf5 Enumerated_Domain_Value_Definition: Young alluvial-fan deposits, Unit 5 Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Qyls Enumerated_Domain_Value_Definition: Young landslide deposits Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: gg Enumerated_Domain_Value_Definition: Gneissose granitoid rock Attribute: Attribute_Label: PLABL Attribute_Definition: Coded geologic map-unit label used to generate plot labels using appropriate stratigraphic symbols. The geologic unit having LABL Mzfg, (Mesozoic), appears in the item PLABL as }fg. The replacement characters call up stratigraphic age symbols from the GeoAge Font Group. Map unit labels will plot on derivative map plots with appropriate stratigraphic symbols if PLABL is used as the source of unit labels. Attribute: Attribute_Label: SHDPS Attribute_Definition: Polygon color from shadeset scamp2.shd (included in the data package) and used to generate the map plotfile Attribute: Attribute_Label: SHDFIL Attribute_Definition: Polygon fill pattern from shadeset geology2.shd (included in the data package) Attribute: Attribute_Label: THICK Attribute_Definition: Thickness data for geologic unit (sedimentary and surficial), where relevant Attribute: Attribute_Label: UNIQUE Attribute_Definition: Allows for the description of geologic properties that are unique to a particular polygon or group of polygons Attribute: Attribute_Label: NAME Attribute_Definition: Name of each geologic-map unit Attribute: Attribute_Label: SOURCE Attribute_Definition: Allows identification of sources from which polygon data have been compiled other than the U.S. Geological Survey authors of this database Detailed_Description: Entity_Type: Entity_Type_Label: red_summ.pat Entity_Type_Definition: INFO table containing general information about each geologic-map unit, including lithologic features, geologic age, and geologic origin which applies to all polygons of a specified map unit. Attribute: Attribute_Label: TAG Attribute_Definition: The data-base item that relates polygon subgroups to their associated map unit identified in the polygon feature attribute table, red_geo.pat. Attribute: Attribute_Label: AGEMIN Attribute_Definition: The minimum age (youngest possible age) for a geologic-map unit. Data include mimimum estimates for (1) age of formation of sedimentary and igneous rocks and surficial materials, (2) metamorphic age for geologic materials that have been metamorphosed, (3) deformation age for geologic materials that have been deformed (folded, faulted, penetratively deformed, brecciated, fractured), and (4) age of alteration for stained and altered geologic materials. Data is represented by coded entries (Matti and others, 1997b). Attribute: Attribute_Label: AGEMAX Attribute_Definition: The maximum age (oldest possible age) for a geologic-map unit. Data include maximum estimates for (1) age of formation of sedimentary and igneous rocks and surficial materials, (2) metamorphic age for geologic materials that have been metamorphosed, (3) deformation age for geologic materials that have been deformed (folded, faulted, penetratively deformed, brecciated, fractured), and (4) age of alteration for stained and altered geologic materials. Data is represented by coded entries (Matti and others, 1997b). Attribute: Attribute_Label: AGECON Attribute_Definition: Indicates the basis for assigning a geologic age to a map unit and the confidence with which that age is assigned. Data is represented by coded entries (Matti and others, 1997b). Attribute: Attribute_Label: TYPE Attribute_Definition: Provides a hierarchical classification of the general lithologic types occurring in a geologic-map unit, including whether a particular map unit is a bedrock unit or a surficial unit. Data is represented by coded entries (Matti and others, 1997b). Attribute: Attribute_Label: CLASS Attribute_Definition: Provides the stratigraphic classification of a rock unit in terms of the North American Code of Stratigraphic Nomenclature. Data is represented by coded entries (Matti and others, 1997b). Attribute: Attribute_Label: SURFACE Attribute_Definition: Identifies geologic and geomorphic characteristics of the upper surface of surficial geologic units. Data is represented by coded entries (Matti and others, 1997b). Attribute: Attribute_Label: ORIGIN Attribute_Definition: Provides coded information for the geologic origin of a map unit. Data is represented by coded entries (Matti and others, 1997b). Detailed_Description: Entity_Type: Entity_Type_Label: red_geo.aat Entity_Type_Definition: Geologic lines, which include features such as faults, contacts, and terraces are attributed with a set of feature attribute items contained in red_geo.aat. (A complete description of each line type is available in the data table, lines.rel.) Attribute: Attribute_Label: L-SYMB Attribute_Definition: Calls up the appropriate line symbol from the lineset geoscamp2.lin (included in the data package) Attribute: Attribute_Label: L-TAG Attribute_Definition: Consists of a character and numerical value e.g. C17 which allows the user to relate the line entity to its corresponding definition in the INFO table lines.rel. Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: C17 Enumerated_Domain_Value_Definition: .contact.landslide.location observable.location meets map accuracy standard Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: C18 Enumerated_Domain_Value_Definition: .contact.landslide.location observable.location may not meet map accuracy standard Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: C25 Enumerated_Domain_Value_Definition: .contact.landslide.crown scarp.location meets map accuracy standard Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: C26 Enumerated_Domain_Value_Definition: .contact.landslide.crown scarp.location may not meet map accuracy standard Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: C29 Enumerated_Domain_Value_Definition: .contact.sedimentary.location meets map accuracy standard Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: C30 Enumerated_Domain_Value_Definition: .contact.sedimentary.location may not meet map accuracy standard Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: C34 Enumerated_Domain_Value_Definition: .contact.sedimentary.identity questionable.location inferred.location may not meet map accuracy standard Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: C37 Enumerated_Domain_Value_Definition: .contact.sedimentary.separates terraced alluvial units.location meets accuracy standard Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: C38 Enumerated_Domain_Value_Definition: .contact.sedimentary.separates terraced alluvial units.location may not meet accuracy standard Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: C50 Enumerated_Domain_Value_Definition: .contact.igneous.location may not meet accuracy standard Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: C98 Enumerated_Domain_Value_Definition: .contact.scratch boundary.sedimentary Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: CL1 Enumerated_Domain_Value_Definition: .cartographic line.map boundary Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: F10 Enumerated_Domain_Value_Definition: .fault.high-angle.normal slip.location observable.may not meet accuracy standard Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: F11 Enumerated_Domain_Value_Definition: .fault.high-angle.reverse slip.location observable.location may not meet map accuracy standard Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: F17 Enumerated_Domain_Value_Definition: .fault.high-angle.reverse slip.location inferred beneath mapped covering unit.location may not meet map accuracy standard Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: F19 Enumerated_Domain_Value_Definition: .fault.high-angle.unspecified slip.location observable.may not meet map accuracy standard Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: F2 Enumerated_Domain_Value_Definition: .fault.high-angle.strike slip.right lateral.location observable.meets map accuracy standard Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: F20 Enumerated_Domain_Value_Definition: .fault.high-angle.strike slip.right lateral.location observable.may not meet accuracy standard Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: F22 Enumerated_Domain_Value_Definition: .fault.high-angle.normal slip.location observable.may not meet map accuracy standard Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: F23 Enumerated_Domain_Value_Definition: .fault.high-angle.reverse slip.location observable.may not meet map accuracy standard Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: F34 Enumerated_Domain_Value_Definition: .fault.high-angle.normal slip.existence questionable.location may not meet map-accuracy standard Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: F40 Enumerated_Domain_Value_Definition: .fault.high-angle.normal slip.existence questionable.location inferred beneath mapped covering unit.location may not meet map accuracy standard Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: F52 Enumerated_Domain_Value_Definition: .fault.high-angle.normal slip.fault scarp.meets map accuracy standard Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: F58 Enumerated_Domain_Value_Definition: .fault.high-angle.normal slip.fault scarp.location may not meet map accuracy standard Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: F67R Enumerated_Domain_Value_Definition: .fault.high-angle.normal slip.scarp.identity questionable Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: F74 Enumerated_Domain_Value_Definition: .fault.low-angle.slip unspecified.location observable.location may not meet map-accuracy standard Attribute: Attribute_Label: L-SOURCE Attribute_Definition: Allows identification of sources other than the U.S. Geological Survey authors of this SCAMP products from which line data have been compiled Attribute: Attribute_Label: L-AGECON Attribute_Definition: Indicates the confidence with which a geologic age has been assigned to each linear entity Attribute: Attribute_Label: L-UNIQUE Attribute_Definition: Allows for the description of attributes that are unique to a particular linear feature or segment of a feature, e.g. faults having associated seismicity Attribute: Attribute_Label: L-NAME Attribute_Definition: Allows for the description of attributes that are unique to a particular linear feature or segment of a feature, e.g. faults having associated seismicity Attribute: Attribute_Label: L-AGEMAX Attribute_Definition: Coded statement of the maximum age (oldest age) estimated for geologic contacts and faults or for segments of such features Attribute: Attribute_Label: L-AGEMIN Attribute_Definition: Coded statement of the minimum age (youngest age) estimated for geologic contacts and faults or for segments of such features Detailed_Description: Entity_Type: Entity_Type_Label: red_pts.pat Entity_Type_Definition: Structural point data. Attribute: Attribute_Label: P-DIP Attribute_Definition: Dip of planar point features Attribute: Attribute_Label: P-STRIKE Attribute_Definition: Azimuth strike of planar features Attribute: Attribute_Label: P-SYMB Attribute_Definition: Calls the point-type from the markerset geoscamp2.mrk (included in the data package) Attribute: Attribute_Label: P-TAG Attribute_Definition: Consists of a character(s) and numerical value e.g. FN42 which allows the user to relate the point entity to its corresponding definition in the INFO table points.rel. Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: B14 Enumerated_Domain_Value_Definition: .bedding attitude.sedimentary.inclined.strike and dip indicated but not measured.original data Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: B2 Enumerated_Domain_Value_Definition: .bedding attitude.sedimentary.inclined.original data Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: B4 Enumerated_Domain_Value_Definition: .bedding attitude.sedimentary.vertical.original data Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: FC4 Enumerated_Domain_Value_Definition: .fault dip direction Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: FN13 Enumerated_Domain_Value_Definition: .foliation attitude.igneous.inclined.original data Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: FN2 Enumerated_Domain_Value_Definition: .foliation attitude.origin not determined.inclined.original data Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: FN3 Enumerated_Domain_Value_Definition: .foliation attitude.origin not determined.vertical.original data Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: FN31 Enumerated_Domain_Value_Definition: .foliation attitude.strain dominated.inclined.original data Attribute: Attribute_Label: P-SOURCE Attribute_Definition: Allows identification of all sources of geologic datarepresented in the Redlands geologic map database Attribute: Attribute_Label: P-UNIQUE Attribute_Definition: Allows for the description of attributes uniquely associated with a particular point datum location Attribute: Attribute_Label: P-AGECON Attribute_Definition: Indicates the confidence with which a geologic age is assigned to a point feature Attribute: Attribute_Label: P-PLUNGE Attribute_Definition: Lineation plunge value Attribute: Attribute_Label: P-DIPDIR Attribute_Definition: Azimuthal direction of dip Attribute: Attribute_Label: P-BEARING Attribute_Definition: Azimuthal direction of lineation bearing Attribute: Attribute_Label: P-AGEMIN Attribute_Definition: Coded statement of the minimum age (youngest age) estimated for geologic features represented by point data Attribute: Attribute_Label: P-AGEMAX Attribute_Definition: Coded statement of the maximum age (oldest age) estimated for geologic features represented by point data Detailed_Description: Entity_Type: Entity_Type_Label: red_obs.pat Entity_Type_Definition: Data that repesent the locality of data stations associated with multiple authors and sources Attribute: Attribute_Label: P-TAG Attribute_Definition: Point tag which consists of a character(s) and numerical value; allows the user to relate the point entity to its corresponding definition in the data table, points.rel Attribute: Attribute_Label: P-SYMB Attribute_Definition: Calls the point-type from the markerset geoscamp2.mrk (included in the data package) Attribute: Attribute_Label: P-SOURCE Attribute_Definition: Allows identification of sources from which point data have been compiled other than the U.S. Geological Survey authors of this product Attribute: Attribute_Label: P-UNIQUE Attribute_Definition: Allows for the description of attributes uniquely associated with a particular point datum location Attribute: Attribute_Label: P-STAT Attribute_Definition: Alphanumeric identification of a particular datum location Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: NRCS-SWSB-26 Enumerated_Domain_Value_Definition: Natural Resources Conservation Service pit/soil profile description Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: NRCS-SWSB-15 Enumerated_Domain_Value_Definition: Natural Resources Conservation Service pit/soil profile description Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: NRCS-SWSB-20 Enumerated_Domain_Value_Definition: Natural Resources Conservation Service pit/soil profile description Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: NRCS-SWSB-17 Enumerated_Domain_Value_Definition: Natural Resources Conservation Service pit/soil profile description Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: NRCS-SWSB-23 Enumerated_Domain_Value_Definition: Natural Resources Conservation Service pit/soil profile description Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: WRD-RV Enumerated_Domain_Value_Definition: USGS Water Resources Division well/well-log data Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: WRD-CC Enumerated_Domain_Value_Definition: USGS Water Resources Division well/well-log data Detailed_Description: Entity_Type: Entity_Type_Label: red_str.aat Entity_Type_Definition: Structural line data Attribute: Attribute_Label: The attribute items l-SYMB, L-TAG, L-SOURCE, L_AGE, L-AGECON, L-UNIQUE, and L-NAME are used in red_str as they are in other database coverages. Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: FA41 Enumerated_Domain_Value_Definition: .fold axial trace.anticline.upright.plunging.location meets map accuracy standard Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: FA44 Enumerated_Domain_Value_Definition: .fold axial trace.anticline.upright.plunging.location may not meet map accuracy standard Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: FA105 Enumerated_Domain_Value_Definition: .fold axial trace.anticline.upright.plunging.location meets map accuracy standard Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: FA108 Enumerated_Domain_Value_Definition: .fold axial trace.syncline.upright.plunging.location may not meet map accuracy standard Detailed_Description: Entity_Type: Entity_Type_Label: red_ptsorn.pat Entity_Type_Definition: Line ornamentation Attribute: Attribute_Label: P-SYMB Attribute_Definition: Calls the point-type from the markerset geoscamp2.mrk (included in the data package) Attribute: Attribute_Label: P-TAG Attribute_Definition: Point tag which consists of a character(s) and numerical value; allows the user to relate the point entity to its corresponding definition in the data table, points.rel Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: FC1 Enumerated_Domain_Value_Definition: .fault attribute.bar-and-ball on down-dropped fault block. Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: FC2 Enumerated_Domain_Value_Definition: .fault attribute.strike-slip arrows.right lateral. Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: FAC4 Enumerated_Domain_Value_Definition: .fold ornament.anticline.upright axial plane. Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: FAC10 Enumerated_Domain_Value_Definition: .fold ornament.syncline.upright axial plane. Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: FAC17 Enumerated_Domain_Value_Definition: .fold ornament.anticline.plunge-direction. Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: FAC19 Enumerated_Domain_Value_Definition: .fold ornament.syncline.plunge-direction. Detailed_Description: Entity_Type: Entity_Type_Label: red_ldr.aat Entity_Type_Definition: Unit label annotation leaders Attribute: Attribute_Label: L-SYMB Attribute_Definition: Coded integer symbol (1) that calls up the apprporiate line symbol in lineset geoscamp2.lin Distribution_Information: Distributor: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey Information Services Contact_Address: Address_Type: mailing address Address: Box 25286 Denver Federal Center City: Denver State_or_Province: CO Postal_Code: 80225 Country: USA Contact_Voice_Telephone: 303-202-4700 Contact_Facsimile_Telephone: 303-202-4693 Distribution_Liability: The U.S. Geological Survey (USGS) provides these geographic data "as is." The USGS makes no guarantee or warranty concerning the accuracy of information contained in the geographic data. The USGS further makes no warranties, either expressed or implied as to any other matter whatsoever, including, without limitation, the condition of the product, or its fitness for any particular purpose. The burden for determining fitness for use lies entirely with the user. Although these data have been processed successfully on computers at the USGS, no warranty, expressed or implied, is made by the USGS regarding the use of these data on any other system, nor does the fact of distribution constitute or imply any such warranty. In no event shall the USGS have any liability whatsoever for payment of any consequential, incidental, indirect, special, or tort damages of any kind, including, but not limited to, any loss of profits arising out of use of or reliance on the geographic data or arising out of the delivery, installation, operation, or support by USGS. The Geologic Map and Digital Database of the Redlands 7.5' Quadrangle, San Bernardino and Riverside Counties, California, 1:24,000 map-scale, and any derivative maps thereof, is not meant to be used or displayed at any scale larger than 1:24,000 (e.g., 1:12,000). Standard_Order_Process: Digital_Form: Digital_Transfer_Information: Format_Name: ARCE Format_Version_Number: 7.2.1 Format_Information_Content: Geologic units and structural features File_Decompression_Technique: tar and gzip Transfer_Size: 2.5 Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: http://pubs.usgs.gov/of/2003/0302/red.tar.gz Fees: none Metadata_Reference_Information: Metadata_Date: 20160610 Metadata_Review_Date: 20040726 Metadata_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Peter N Schweitzer Contact_Organization: USGS Midwest Area Contact_Position: Collection manager, USGS Geoscience Data Clearinghouse, http://geo-nsdi.er.usgs.gov/ Contact_Address: Address_Type: mailing address Address: Mail Stop 954 12201 Sunrise Valley Dr City: Reston State_or_Province: VA Postal_Code: 20192-0002 Country: USA Contact_Voice_Telephone: 703-648-6533 Contact_Facsimile_Telephone: 703-648-6252 Contact_Electronic_Mail_Address: pschweitzer@usgs.gov Metadata_Standard_Name: Content Standard for Digital Geospatial Metadata Metadata_Standard_Version: FGDC-STD-001-1998 Metadata_Access_Constraints: none Metadata_Use_Constraints: none