Metadata: Identification_Information: Citation: Citation_Information: Originator: Theodore R. Brandt Originator: David W. Moore Originator: Kyle E. Murray Publication_Date: 2003 Title: A spatial database of bedding attitudes to accompany Geologic map of the greater Denver area, Front Range urban corridor, Colorado, by Donald E. Trimble and Michael N. Machette Edition: version 1.0 Geospatial_Data_Presentation_Form: map Series_Information: Series_Name: U.S. Geological Survey Open-File Report Issue_Identification: 03-25 Publication_Information: Publication_Place: Denver, Colorado, U.S.A. Publisher: United States Geological Survey Online_Linkage: http://pubs.usgs.gov/of/2003/ofr-03-025/ Description: Abstract: This digital map shows bedding attitude symbols display over the geographic extent of surficial deposits and rock stratigraphic units (formations) as compiled by Trimble and Machette 1973-1977 and published in 1979 (U.S. Geological Survey Map I-856-H) under the Front Range Urban Corridor Geology Program. Trimble and Machette compiled their geologic map from published geologic maps and unpublished geologic mapping having varied map unit schemes. A convenient feature of the compiled map is its uniform classification of geologic units that mostly matches those of companion maps to the north (USGS I-855-G) and to the south (USGS I-857-F). Published as a color paper map, the Trimble and Machette map was intended for land-use planning in the Front Range Urban Corridor. This map recently (1997-1999), was digitized under the USGS Front Range Infrastructure Resources Project (see cross-reference). In general, the mountainous areas in the west part of the map exhibit various igneous and metamorphic bedrock units of Precambrian age, major faults, and fault brecciation zones at the east margin (5-20 km wide) of the Front Range. The eastern and central parts of the map (Colorado Piedmont) depict a mantle of unconsolidated deposits of Quaternary age and interspersed outcroppings of Cretaceous or Tertiary-Cretaceous sedimentary bedrock. The Quaternary mantle is comprised of eolian deposits (quartz sand and silt), alluvium (gravel, sand, and silt of variable composition), colluvium, and few landslides. At the mountain front, north-trending, dipping Paleozoic and Mesozoic sandstone, shale, and limestone bedrock formations form hogbacks and intervening valleys. Purpose: This digital map can serve various purposes related to land-use planning in the greater Denver metropolitan area. It shows potential shallow aquifers and rock units that are suitable for waste disposal, and aggregate mining, for example. The map distinguishes rock units that are somewhat predictable (dependent on scale and uniformity of the rock unit) in physical properties and mineral content, making the map useful in planning. Given this predictability, experts can use the map to derive thematic maps that show the suitability of surficial materials for various uses by man; or to derive maps that show areas susceptible to certain hazards, for example, swelling soils, heaving bedrock, landslides. The digital map is designed to provide geologic data at 1:100,000 scale to address urban growth issues and to help resolve conflicts among planned uses of the land. Supplemental_Information: Coverages included in this geospatial database: > denvdip coverage: bedding attitudes > denvcnty coverage: county boundaries > denvhwy coverage: major highways and arterials > denvhyp coverage: hypsography > denvplss coverage: township and range lines > geoscamp2.mrk: This markerset file defines the geologic markers in the geologically themed coverages. Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 2003 Currentness_Reference: publication date Status: Progress: Complete Maintenance_and_Update_Frequency: none currently planned Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -105.375 East_Bounding_Coordinate: -104.625 North_Bounding_Coordinate: 40.0 South_Bounding_Coordinate: 39.375 Keywords: Theme: Theme_Keyword_Thesaurus: USGS Thesaurus Theme_Keyword: geology Theme_Keyword: geologic structure Theme_Keyword: geologic maps Theme_Keyword: geospatial datasets Theme: Theme_Keyword_Thesaurus: American Geological Institute (AGI) Glossary of Geology Theme_Keyword: Geologic map Theme_Keyword: Quaternary deposits Theme_Keyword: Rocky Flats Alluvium Theme_Keyword: windblown sand Theme_Keyword: eolian sand Theme_Keyword: alluvial gravel Theme_Keyword: landslide deposit Theme_Keyword: geologic hazard Theme_Keyword: land-use planning Theme_Keyword: urban growth Theme_Keyword: urban zoning Theme_Keyword: aggregate Theme_Keyword: mine subsidence Theme_Keyword: Paleocene bedrock Theme_Keyword: Arapahoe Formation Theme_Keyword: Oligocene bedrock Theme_Keyword: Wall Mountain Tuff Theme_Keyword: Pierre Shale Theme_Keyword: Dawson Formation Theme_Keyword: Cretaceous rocks Theme_Keyword: Denver Formation Theme_Keyword: Paleozoic rocks Theme_Keyword: Silver Plume quartz monzonite Theme_Keyword: Pikes Peak granite Theme_Keyword: Denver Creek granodiorite Theme_Keyword: Precambrian rocks Theme_Keyword: Golden Fault Theme: Theme_Keyword_Thesaurus: ISO 19115 Topic Categories Theme_Keyword: geoscientificInformation Place: Place_Keyword_Thesaurus: Board of Geologic Names Place_Keyword: USA Place_Keyword: United States of America Place_Keyword: Colorado Place_Keyword: Denver County Place_Keyword: Jefferson County Place_Keyword: Adams County Place_Keyword: Arapahoe County Place_Keyword: Denver Place_Keyword: Golden Place_Keyword: Colorado Front Range Place_Keyword: Colorado Piedmont Place_Keyword: Front Range Urban Corridor Place_Keyword: Douglas County Place_Keyword: Elbert County Place: Place_Keyword_Thesaurus: Augmented FIPS 10-4 and FIPS 6-4 Place_Keyword: f08031 = Denver Place_Keyword: f08059 = Jefferson Place_Keyword: f08001 = Adams Place_Keyword: f08005 = Arapahoe Place_Keyword: f08035 = Douglas Place_Keyword: f08039 = Elbert Access_Constraints: none Use_Constraints: none. Acknowledgment of the U.S. Geological Survey would be appreciated in products derived from these data. Although software enables the user to display images at various scales, map data in this report should not be used at scales greater than 1:100,000. Point_of_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Theodore R. Brandt Contact_Organization: U.S. Geological Survey Contact_Address: Address_Type: mailing address Address: MS 980, Box 25046 DFC City: Denver State_or_Province: CO Postal_Code: 80225-0046 Country: USA Contact_Voice_Telephone: 303-236-1901 Contact_Facsimile_Telephone: 303-236-0214 Contact_Electronic_Mail_Address: tbrandt@usgs.gov Browse_Graphic: Browse_Graphic_File_Name: http://pubs.usgs.gov/of/2003/ofr-03-025/OFR-03-025-thb.gif Browse_Graphic_File_Description: Reduced-size image of the entire map sheet, 300x217 pixels, 21k bytes Browse_Graphic_File_Type: GIF Browse_Graphic: Browse_Graphic_File_Name: http://pubs.usgs.gov/of/2003/ofr-03-025/OFR-03-025map.pdf Browse_Graphic_File_Description: Printable representation of map layout, 10 megabytes Browse_Graphic_File_Type: PDF Cross_Reference: Citation_Information: Originator: Donald E. Trimble Originator: Michael N. Machette Publication_Date: 1979 Title: Geologic map of the greater Denver area, Front Range urban corridor, Colorado, by Donald E. Trimble and Michael N. Machette Geospatial_Data_Presentation_Form: map Series_Information: Series_Name: U.S. Geological Survey Miscellaneous Investigations Series Map Issue_Identification: I-856-H Publication_Information: Publication_Place: Denver, Colorado Publisher: United States Geological Survey Online_Linkage: http://pubs.usgs.gov/imap/i-856-h/ Native_Data_Set_Environment: Windows_2000, Intel ARC/INFO version 8.1.2 Data_Quality_Information: Attribute_Accuracy: Attribute_Accuracy_Report: Geologic bedding attitude points were captured by hand digitizing. The digital map was assembled and edited in ARC/INFO by manually comparing hard copy plots of the digital data with source map data. Logical_Consistency_Report: Map elements were visually checked for overshoots, undershoots, duplicate features, and other errors. The original Trimble and Machette published paper map (USGS Map I-856-H) conformed with U.S. Geological Survey editorial standards and stratigraphic nomenclature. The digital version of Map I-856-H (version 1.1) strictly follows this nomenclature and was reviewed by another geologist and cartographer for consistency with basic geologic principles and general conformity to USGS mapping standards. ARC/INFO software was used to create topological relations among features. Completeness_Report: This report has not been reviewed for conformity with U.S. Geological Survey editorial standards and stratigraphic nomenclature. Data are complete: no features of Trimble and Machette's map (USGS Map I-856-H) compiled map were eliminated or generalized. Properties and physical characteristics of geologic map units (rock-stratigraphic and surficial units) are described in the text explanation. Digital base map coverage are included with this report. Positional_Accuracy: Horizontal_Positional_Accuracy: Horizontal_Positional_Accuracy_Report: Digitized positions on the map that depict bedding attitude symbols are estimated to be within about 50 m of the actual measurement point on the land in most instances. Horizontal positional accuracy is tested by visual comparison of hard copy test plots to source maps or comparing locations of data on a computer monitor to other data layers in the same geographic area. The database contains elevation and U.S. Public Land Survey System data derived from U. S. Geological Survey Digital Line Graph data. Accuracy of these digital data indirectly depends on accuracy of the base maps on which the original source geologic maps were compiled. These base maps were made by the U.S. Geological Survey, which routinely checks them for compliance with the National Map Accuracy Standards. Highway location data derived from U.S. Department of Transportation National Transportation Atlas, 2001 National Highway Planning Network Version 3.0 was compiled from various sources at a scale of 1:100,000 and has a positional accuracy of within 80 m of actual transportation feature position. County boundary data derived from Colorado Department of Local Affairs, Colorado Office of Emergency Management data was compiled at a scale of 1:50,000 and has a positional accuracy of within 50 m of actual boundary feature position. Lineage: Source_Information: Source_Citation: Citation_Information: Originator: Bryant B. H., Originator: Miller R. D., and Originator: Scott G. R. Title: Geologic map of the Indian Hills quadrangle, Jefferson County, Colorado Publication_Date: 1973 Series_Information: Series_Name: U.S. Geological Survey Geologic Quadrangle Map Issue_Identification: GQ-1073 Type_of_Source_Media: paper Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1973 Source_Currentness_Reference: publication date Source_Citation_Abbreviation: Bryant and others (1973) Source_Contribution: geologic data source Source_Information: Source_Citation: Citation_Information: Originator: Scott, G. R. Title: Preliminary geologic map of the Indian Hills quadrangle, Jefferson County, Colorado Publication_Date: 1961 Series_Information: Series_Name: U.S. Geological Survey Miscellaneous Investigations Map Issue_Identification: I-333 Type_of_Source_Media: paper Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1961 Source_Currentness_Reference: publication date Source_Citation_Abbreviation: Scott (1961) Source_Contribution: geologic data source Source_Information: Source_Citation: Citation_Information: Originator: Scott, G. R. Title: Geology of the Littleton quadrangle, Jefferson, Douglas, and Arapahoe Counties, Colorado Publication_Date: 1962 Series_Information: Series_Name: U.S. Geological Survey Bulletin Issue_Identification: 1121-L Other_Citation_Details: 53 p. Type_of_Source_Media: paper Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1962 Source_Currentness_Reference: publication date Source_Citation_Abbreviation: Scott (1962) Source_Contribution: geologic data source Source_Information: Source_Citation: Citation_Information: Originator: Scott, G. R. Title: Bedrock geology of the Kassler quadrangle, Colorado Publication_Date: 1963 Series_Information: Series_Name: U.S. Geological Survey Professional Paper Issue_Identification: PP-421-B Other_Citation_Details: p. 71-125 Type_of_Source_Media: paper Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1963 Source_Currentness_Reference: publication date Source_Citation_Abbreviation: Scott (1963) Source_Contribution: geologic data source Source_Information: Source_Citation: Citation_Information: Originator: Scott, G. R. Title: Geologic map of the Morrison quadrangle, Jefferson County, Colorado Publication_Date: 1972 Series_Information: Series_Name: U.S. Geological Survey Miscellaneous Investigations Map Issue_Identification: I-790-A Type_of_Source_Media: paper Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1972 Source_Currentness_Reference: publication date Source_Citation_Abbreviation: Scott (1972) Source_Contribution: geologic data source Source_Information: Source_Citation: Citation_Information: Originator: Spencer, F.D. Title: Bedrock geology of the Louisville quadrangle, Colorado Publication_Date: 1961 Series_Information: Series_Name: U.S. Geological Survey Geologic Quadrangle Map Issue_Identification: GQ-151 Type_of_Source_Media: paper Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1961 Source_Currentness_Reference: publication date Source_Citation_Abbreviation: Spencer (1961) Source_Contribution: geologic data source Source_Information: Source_Citation: Citation_Information: Originator: Van Horn, Richard Title: Bedrock geology of the Golden quadrangle, Colorado Publication_Date: 1957 Series_Information: Series_Name: U.S. Geological Survey Geologic Quadrangle Map Issue_Identification: GQ-103 Type_of_Source_Media: paper Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1957 Source_Currentness_Reference: publication date Source_Citation_Abbreviation: Van Horn (1957) Source_Contribution: geologic data source Source_Information: Source_Citation: Citation_Information: Originator: Van Horn, Richard Title: Surficial and bedrock geologic map of the Golden quadrangle, Jefferson County, Colorado Publication_Date: 1972 Series_Information: Series_Name: U.S. Geological Survey Miscellaneous Investigations Map Issue_Identification: I-761-A Type_of_Source_Media: paper Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1972 Source_Currentness_Reference: publication date Source_Citation_Abbreviation: Van Horn (1972) Source_Contribution: geologic data source Source_Information: Source_Citation: Citation_Information: Originator: Wells, J. D. Title: Geology of the Eldorado Springs quadrangle, Boulder and Jefferson Counties, Colorado Publication_Date: 1967 Series_Information: Series_Name: U.S. Geological Survey Bulletin Issue_Identification: 1221-D Other_Citation_Details: 85 p. Type_of_Source_Media: paper Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1967 Source_Currentness_Reference: publication date Source_Citation_Abbreviation: Wells (1967) Source_Contribution: geologic data source Process_Step: Process_Description: The geologic database was compiled using ARC/INFO. Subsequent to this original compilation, we edited and corrected the database by digitizing directly into ARC/INFO from original published maps. An average RMS error of .003 or better was achieved in digitizing these features. Process_Date: 1999 Process_Step: Process_Description: Creation of original metadata record Process_Date: 20030912 Process_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Theodore Brandt Contact_Organization: U.S. Geological Survey Contact_Address: Address_Type: mailing address Address: U.S. Geological Survey Address: MS 980, Box 25046 Denver Federal Center City: Denver State_or_Province: CO Postal_Code: 80225-0046 Contact_Voice_Telephone: 303-236-1901 Spatial_Data_Organization_Information: Direct_Spatial_Reference_Method: Vector Spatial_Reference_Information: Horizontal_Coordinate_System_Definition: Planar: Planar_Coordinate_Information: Planar_Coordinate_Encoding_Method: coordinate pair Coordinate_Representation: Abscissa_Resolution: 2.5 Ordinate_Resolution: 2.5 Planar_Distance_Units: METERS Grid_Coordinate_System: Grid_Coordinate_System_Name: Universal Transverse Mercator Universal_Transverse_Mercator: UTM_Zone_Number: 13 Transverse_Mercator: Scale_Factor_at_Central_Meridian: 0.9996 Longitude_of_Central_Meridian: -105 Latitude_of_Projection_Origin: 0.0 False_Easting: 500000 False_Northing: 0.0 Geodetic_Model: Horizontal_Datum_Name: North American Datum of 1927 Ellipsoid_Name: Clarke 1866 Semi-major_Axis: 6378206.4 Denominator_of_Flattening_Ratio: 294.98 Entity_and_Attribute_Information: Overview_Description: Entity_and_Attribute_Overview: The data is supplied in ARC/INFO export format. DATABASE STRUCTURE - ARC/INFO ==================================== This GIS database includes related look-up tables, which store detailed attribute information. This database structure is more fully described in USGS OFR 99-438. The GIS database structure used in the database includes symbol items in coverage point, polygon (PAT) and arc (AAT)attribute tables for user convenience. Arc/Info relates for each coverage are saved in a file named .rel. Use the RELATE command with the restore argument at the arc prompt to make the relates active. Alternatively, in Arctools, use the Relate environment: open dialog in the Manage - Relates flyout menu under the Arctools menu to make the relates active. denvdip coverage: Contains points recording site-specific observations and measurements, such as strike and dip of bedding. In the denvdip.pat INFO file the PTTYPE item lists the type of point symbol, e.g., strike and dip of inclined bedding. The SYMBOL item lists the marker symbol used by ArcInfo to identify the type of structural map symbol(Symbol numbers refer to the geoscamp2.mrk markerset). The STRIKE item contains the strike of bedding. Strike is an azimuthal angle (measured in degrees from 0 to 360 in a clockwise direction from North). The DIP item contains the dip of bedding. This value is an angle measured (in degrees 0 to 90) down from the horizontal; thus a horizontal dip is 0 degrees and a vertical dip is 90 degrees. The SOURCE item lists the numeric code used to identify the data source. The DISPLAY item is coded 1 when a point is displayed on the map layout, 2 when it is not. Some data points are not displayed on the map because they would overpost adjacent data points at the 1:100,000 display scale. In the coverage's denvdip.ref INFO file the SOURCE item lists the numeric code used to identify the data source. The scale item lists the scale of the source map. (This value is the denominator of the proportional fraction that identifies the scale of the map that was digitized or scanned to produce the digital map.) The AUTHORS item lists the author(s) or compiler(s) of source map entered as last name, first name or initial, and middle initial. The YEAR item lists the source (map) publication date. The REFERENCE item lists the remainder of the reference in USGS reference format. denvcnty coverage: Contains lines representing county boundaries derived from Colorado Department of Local Affairs, Colorado Office of Emergency Management data. In the coverage's denvcnty.ref INFO file the SOURCE item lists the numeric code used to identify the data source. The scale item lists the scale of the source map. (This value is the denominator of the proportional fraction that identifies the scale of the map that was digitized or scanned to produce the digital map.) The AUTHORS item lists the author(s) or compiler(s) of source map entered as last name, first name or initial, and middle initial. The YEAR item lists the source (map) publication date. The REFERENCE item lists the remainder of the reference in USGS reference format. denvhwy coverage: Contains lines representing highways and major arterials. In the denvhwy.aat INFO file the FEATURID item contains a unique line identifier assigned by the Federal Highway Administration. The DESCRIPT item provides the name or identification for the link (i.e. BASELINE RD). The DSOURCE item provides the original source of the coordinate information (i.e. S=State Supplied Digital Data, U=USGS Digital Line Graphs, T=US Census TIGER/Line files, M=Digitized from State supplied maps, H=Military Supplied data, all other values indicate Unknown). The STFIPS item indicates the two character State FIPS Code (FIPS Pub 6-4). The CTFIPS item indicates the three digit County FIPS code (FIPS Pub 6-4). The SIGN1 item indicates the Primary Sign Route (i.e. I-25). The SIGN2 item indicates the Alternate Sign Route. The MILES item indicates an accurate measurement in miles for the link chain. The KM item indicates an accurate measurement in kilometers for the link chain. The FACTYPE item describes the permissible flow of traffic over the link (1=One-way flow, 2=Bi-directional flow). The LANES item indicates the number of lanes in both directions. In the coverage's denvhwy.ref INFO file the SOURCE item lists the numeric code used to identify the data source. The scale item lists the scale of the source map. (This value is the denominator of the proportional fraction that identifies the scale of the map that was digitized or scanned to produce the digital map.) The AUTHORS item lists the author(s) or compiler(s) of source map entered as last name, first name or initial, and middle initial. The YEAR item lists the source (map) publication date. The REFERENCE item lists the remainder of the reference in USGS reference format. denvhyp coverage: Contains lines representing hypsographic contours derived from USGS Digital Line Graph data. In the denvhyp.aat INFO file the ELEV item contains the contour elevation in meters. In the coverage's denvhyp.ref INFO file the SOURCE item lists the numeric code used to identify the data source. The scale item lists the scale of the source map. (This value is the denominator of the proportional fraction that identifies the scale of the map that was digitized or scanned to produce the digital map.) The AUTHORS item lists the author(s) or compiler(s) of source map entered as last name, first name or initial, and middle initial. The YEAR item lists the source (map) publication date. The REFERENCE item lists the remainder of the reference in USGS reference format. denvplss coverage: Contains lines representing U.S. Public Land Survey System township and range lines derived from USGS Digital Line Graph data In the coverage's denvplss.ref INFO file the SOURCE item lists the numeric code used to identify the data source. The scale item lists the scale of the source map. (This value is the denominator of the proportional fraction that identifies the scale of the map that was digitized or scanned to produce the digital map.) The AUTHORS item lists the author(s) or compiler(s) of source map entered as last name, first name or initial, and middle initial. The YEAR item lists the source (map) publication date. The REFERENCE item lists the remainder of the reference in USGS reference format. The INFO structure of these files is listed below: >DENVDIP.PAT: >COLUMN ITEM NAME WIDTH OUTPUT TYPE N.DEC ALTERNATE NAME > 1 AREA 8 18 F 5 > 9 PERIMETER 8 18 F 5 > 17 DENVDIP# 4 5 B - > 21 DENVDIP-ID 4 5 B - > 25 PTTYPE 80 80 C - > 105 SYMBOL 3 3 I - > 108 STRIKE 3 3 I - > 111 DIP 3 3 I - > 114 SOURCE 4 4 I - > 118 DISPLAY 3 3 I - > >DENVDIP.REF: > >COLUMN ITEM NAME WIDTH OUTPUT TYPE N.DEC ALTERNATE NAME > 1 SOURCE 4 4 I - > 5 SCALE 8 8 I - > 13 AUTHORS 200 200 C - > 213 YEAR 4 4 I - > 217 REFERENCE 250 250 C - > >DENVCNTY.AAT: > >COLUMN ITEM NAME WIDTH OUTPUT TYPE N.DEC ALTERNATE NAME > 1 FNODE# 4 5 B - > 5 TNODE# 4 5 B - > 9 LPOLY# 4 5 B - > 13 RPOLY# 4 5 B - > 17 LENGTH 8 18 F 5 > 25 DENVCNTY# 4 5 B - > 29 DENVCNTY-ID 4 5 B - > 33 SOURCE 4 4 I - > >DENVCNTY.REF: > >COLUMN ITEM NAME WIDTH OUTPUT TYPE N.DEC ALTERNATE NAME > 1 SOURCE 4 4 I - > 5 SCALE 8 8 I - > 13 AUTHORS 200 200 C - > 213 YEAR 4 4 I - > 217 REFERENCE 250 250 C - > >DENVHWY.AAT: > >COLUMN ITEM NAME WIDTH OUTPUT TYPE N.DEC ALTERNATE NAME > 1 FNODE# 4 5 B - > 5 TNODE# 4 5 B - > 9 LPOLY# 4 5 B - > 13 RPOLY# 4 5 B - > 17 LENGTH 8 18 F 5 > 25 DENVHWY# 4 5 B - > 29 DENVHWY-ID 4 5 B - > 33 FEATURID 8 20 F 0 > 41 DESCRIPT 35 35 C - > 76 DSOURCE 1 1 C - > 77 STFIPS 2 2 C - > 79 CTFIPS 3 3 C - > 82 SIGN1 6 6 C - > 88 SIGN2 6 6 C - > 94 MILES 4 13 F 2 > 98 KM 4 13 F 2 > 102 FACTYPE 8 11 F 0 > 110 LANES 8 11 F 0 > 118 SOURCE 4 4 I - > >DENVHWY.REF: > >COLUMN ITEM NAME WIDTH OUTPUT TYPE N.DEC ALTERNATE NAME >COLUMN ITEM NAME WIDTH OUTPUT TYPE N.DEC ALTERNATE NAME > 1 SOURCE 4 4 I - > 5 SCALE 8 8 I - > 13 AUTHORS 200 200 C - > 213 YEAR 4 4 I - > 217 REFERENCE 250 250 C - > >DENVHYP.AAT: > >COLUMN ITEM NAME WIDTH OUTPUT TYPE N.DEC ALTERNATE NAME > 1 FNODE# 4 5 B - > 5 TNODE# 4 5 B - > 9 LPOLY# 4 5 B - > 13 RPOLY# 4 5 B - > 17 LENGTH 8 18 F 5 > 25 DENVHYP# 4 5 B - > 29 DENVHYP-ID 4 5 B - > 33 ELEV 6 6 I - > 39 SOURCE 4 4 I - > >DENVHYP.REF: > >COLUMN ITEM NAME WIDTH OUTPUT TYPE N.DEC ALTERNATE NAME >COLUMN ITEM NAME WIDTH OUTPUT TYPE N.DEC ALTERNATE NAME > 1 SOURCE 4 4 I - > 5 SCALE 8 8 I - > 13 AUTHORS 200 200 C - > 213 YEAR 4 4 I - > 217 REFERENCE 250 250 C - > >DENVPLSS.AAT: > >COLUMN ITEM NAME WIDTH OUTPUT TYPE N.DEC ALTERNATE NAME > 1 FNODE# 4 5 B - > 5 TNODE# 4 5 B - > 9 LPOLY# 4 5 B - > 13 RPOLY# 4 5 B - > 17 LENGTH 8 18 F 5 > 25 DENVPLSS# 4 5 B - > 29 DENVPLSS-ID 4 5 B - > 33 SOURCE 4 4 I - > >DENVPLSS.REF: > >COLUMN ITEM NAME WIDTH OUTPUT TYPE N.DEC ALTERNATE NAME > 1 SOURCE 4 4 I - > 5 SCALE 8 8 I - > 13 AUTHORS 200 200 C - > 213 YEAR 4 4 I - > 217 REFERENCE 250 250 C - > >Coding of PTTYPE in the denvdip coverage: > >Horizontal bedding >Inclined bedding - Showing strike and dip >Overturned bedding - Showing strike and dip >Vertical bedding - Showing strike Entity_and_Attribute_Detail_Citation: http://pubs.usgs.gov/of/2003/ofr-03-025/OFR-03-025text508.pdf Distribution_Information: Distributor: Contact_Information: Contact_Organization_Primary: Contact_Organization: U.S. Geological Survey Contact_Address: Address_Type: mailing address Address: Central Publications Group Address: MS 902 Box 25046 Address: Denver Federal Center City: Denver State_or_Province: CO Postal_Code: 80225-0046 Contact_Voice_Telephone: 303-236-5486 Contact_Electronic_Mail_Address: webmaster@geology.cr.usgs.gov Distribution_Liability: Although this digital spatial data has been subjected to rigorous review and is substantially complete, it is released on the condition that neither the USGS nor the United States Government nor any agency thereof, nor any employees thereof, make any warranty, expressed or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed in this report, or represents that its use would not infringe privately owned rights. Reference therein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. Any views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof. Standard_Order_Process: Digital_Form: Digital_Transfer_Information: Format_Name: ARCE Format_Version_Number: 8.1.2 Format_Information_Content: Bedding attitude observation data File_Decompression_Technique: GZIP TAR archive, In UNIX use the command "gunzip -c | tar xvf -" In Windows, use WinZip (http://www.winzip.com/) or other programs to extract the file. Transfer_Size: 4.7 Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: http://pubs.usgs.gov/of/2003/ofr-03-025/downloads/ofr-03-025.tar.gz Network_Resource_Name: http://pubs.usgs.gov/of/2003/ofr-03-025/downloads/ofr-03-025.zip Digital_Form: Digital_Transfer_Information: Format_Name: Shapefile Format_Version_Number: 1.0 Format_Information_Content: Bedding attitude observation data File_Decompression_Technique: GZIP TAR archive, In UNIX use the command "gunzip -c | tar xvf -" In Windows, use WinZip (http://www.winzip.com/) or other programs to extract the file. Transfer_Size: 4.7 Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: http://pubs.usgs.gov/of/2003/ofr-03-025/downloads/ofr-03-025.tar.gz Network_Resource_Name: http://pubs.usgs.gov/of/2003/ofr-03-025/downloads/ofr-03-025.zip Fees: none Metadata_Reference_Information: Metadata_Date: 20160610 Metadata_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Peter N Schweitzer Contact_Organization: USGS Midwest Area Contact_Position: Collection manager, USGS Geoscience Data Clearinghouse, http://geo-nsdi.er.usgs.gov/ Contact_Address: Address_Type: mailing address Address: Mail Stop 954 12201 Sunrise Valley Dr City: Reston State_or_Province: VA Postal_Code: 20192-0002 Country: USA Contact_Voice_Telephone: 703-648-6533 Contact_Facsimile_Telephone: 703-648-6252 Contact_Electronic_Mail_Address: pschweitzer@usgs.gov Metadata_Standard_Name: Content Standard for Digital Geospatial Metadata Metadata_Standard_Version: FGDC-STD-001-1998