Geologic Map and Digital Database of the House Rock Quadrangle, Coconino County, Northern Arizona

Metadata also available as - [Questions & Answers] - [Parseable text] - [XML]

Metadata:

Identification_Information:
Citation:
Citation_Information:
Originator: Wellmeyer, J.L.
Originator: Block, D.L.
Publication_Date: 2001
Title:
Geologic Map and Digital Database of the House Rock Quadrangle, Coconino County, Northern Arizona
Edition: 1.0
Geospatial_Data_Presentation_Form: geologic map
Series_Information:
Series_Name: U.S. Geological Survey Miscellaneous Field Studies Map
Issue_Identification: 2364
Publication_Information:
Publication_Place: Flagstaff, AZ
Publisher: U.S. Geological Survey
Online_Linkage: http://pubs.usgs.gov/mf/2001/2364/
Description:
Abstract:
This digital map database is compiled from unpublished data and new mapping by the authors, represents the general distribution of surficial and bedrock geology in the mapped area. Together with the accompanying pamphlet, it provides current information on the geologic structure and stratigraphy of the area. The database dilineate map units thatare identified by age and lithology following the stratigraphic nomenclature of the U.S. Geological Survey. The scale of the source maps limits the spatial resolution of the database to 1: 24,000 or smaller.
Purpose:
This geologic map is part of a cooperative project between the U.S. Geological Survey and the Kaibab National Forest Service to provide geologic information for the Paradine Plains Cactus (Pediocactus pardinei B,W. Benson) Conservation Assessment and Strategy conducted by the Kaibab National Forest, Williams, Arizona. The map area includes part of House Rock Valley and part of the Kaibab Plateau, sub- physiographic provinces of the Colorado Plateau. This part of the Colorado Plateau was not previously mapped in adequate geologic detail. This map completes one of several remaining areas where uniform quality geologic mapping was needed. The geologic information in this report may be useful to land management, range management, and flood control programs for all federal and state agencies, and private affairs.
Supplemental_Information:
This report consists of a set of geologic map database files (ARC/INFO coverages) and supporting text and plot files. In addition, the report includes two sets of plot files (Post Script and PDF format) that will generate map sheets and pamphlets similar to a traditional USGS Miscellaneous Field Studies Report. These files are described in the explanatory pamphlets (hr.eps, hr.pdf, or hr.txt). The base layer used in the preparation of the geologic map plot files was derived from a Digital Raster Graphic of a standard USGS 7.5' quadrangle. This raster image was converted to Grid format in ARC/INFO, trimmed and rotated, then converted to a GeoTIFF image. The resultant TIFF image was combined with geologic data to produce the final map layout in Illustrator 8.0.
Time_Period_of_Content:
Time_Period_Information:
Single_Date/Time:
Calendar_Date: 2001
Currentness_Reference: The date given is the anticipated publication date.
Status:
Progress: Complete
Maintenance_and_Update_Frequency: As required
Spatial_Domain:
Bounding_Coordinates:
West_Bounding_Coordinate: -112.12683982
East_Bounding_Coordinate: -111.99838283
North_Bounding_Coordinate: 36.75111616
South_Bounding_Coordinate: 36.62387263
Keywords:
Theme:
Theme_Keyword_Thesaurus: USGS Thesaurus
Theme_Keyword: geology
Theme_Keyword: geologic maps
Theme_Keyword: lithostratigraphy
Theme_Keyword: bedrock geologic units
Theme_Keyword: surficial geologic units
Theme_Keyword: volcanic rocks
Theme_Keyword: geospatial datasets
Theme:
Theme_Keyword_Thesaurus: none
Theme_Keyword: House Rock quadrangle, geology
Theme:
Theme_Keyword_Thesaurus: ISO 19115 Topic Categories
Theme_Keyword: geoscientificInformation
Place:
Place_Keyword_Thesaurus: none
Place_Keyword: House Rock, Northern Arizona
Place:
Place_Keyword_Thesaurus: Augmented FIPS 10-4 and FIPS 6-4
Place_Keyword: f04005 = Coconino
Access_Constraints: None
Use_Constraints: Point_of_Contact Contact_Information
Data_Set_Credit:
Thank you to Scott Graham for his digital review of the database and to Jan Zigler for editing the layout. Thanks also to Carolyn Donlin and Rich Koch for making this data available on the WWW.
Native_Data_Set_Environment: Windows 98, Exceed V 6.1, ARC/INFO 7.1.2, Illustrator 9.0
Data_Quality_Information:
Logical_Consistency_Report: Polygon and chain-node topology present
Completeness_Report:
This report is designed to describe completely the surficial and bedrock geology at a 1:24,000 scale. Geologic information only mappable at a larger scale has been omitted.
Positional_Accuracy:
Horizontal_Positional_Accuracy:
Horizontal_Positional_Accuracy_Report:
Well-located data item are intended to have a positional accuracy within .5 mm at a 1:24,000 map scale, or 12 meters on the ground.
Lineage:
Process_Step:
Process_Description:
The databases in this report were compiled in ARC/INFO version 7.1.2, a commercial Geographic Information System (Environmental Systems Research Institute, Redlands, CA). The files are in either raster (GRID) or vector (coverage) format. Coverages are stored in uncompressed ARC export format. ARC/INFO export files with the .e00 extension can be converted into ARC/INFO coverages in ARC/INFO and can be read by other commercially available Geographic Information Systems. Stable-base maps were scanned at the Flagstaff USGS Field site using an Optronics 5040 raster scanner at a resolution of 50 microns (508 dpi). The resulting raster file was in RLE format and converted to the RLC format using the "rle2rlc" program written by Marilyn Flyn. The RLC file was subsequently converted to an ARC/INFO Grid in ARC/INFO. The linework was vectorized using Gridline. A tic file was created in latitute and longitude and projected into the base map projection (Transverse Mercator) using a central meridian of -112.375. Tics are defined in the four extreme corners of the map are in the geologic coverages corresponding with quadrangle corners both in base maps and digital maps. The tic file was used to transform the grid into Universal Transverse Mercator projection. ARC/INFO generated an RMS (root mean square) report after transforming the original Grid (raster image) into UTM. Scanned lines were edited interactively by hand using the ARC module ARCEDIT and a series of macros and menus, polygon regions were attributed as necessary, and all artifacts and scanning errors visible at 1:24,000 were removed.
Process_Step:
Process_Description: Creation of original metadata record
Process_Date: 20010511
Process_Contact:
Contact_Information:
Contact_Person_Primary:
Contact_Person: Wellmeyer, Jessica L
Contact_Organization: USGS-GEO-WRG-NGM
Contact_Address:
Address_Type: mailing
Address: 2255 N. Gemini Drive
City: Flagstaff
State_or_Province: AZ
Postal_Code: 86001
Country: USA
Contact_Voice_Telephone: (520) 556-7267
Contact_Electronic_Mail_Address: jwellmey@usgs.gov
Spatial_Data_Organization_Information:
Direct_Spatial_Reference_Method: Vector
Point_and_Vector_Object_Information:
SDTS_Terms_Description:
SDTS_Point_and_Vector_Object_Type: Point
Point_and_Vector_Object_Count: 750
SDTS_Terms_Description:
SDTS_Point_and_Vector_Object_Type: Complete chain
Point_and_Vector_Object_Count: 1698
SDTS_Terms_Description:
SDTS_Point_and_Vector_Object_Type: GT-Polygon composed of chains
Point_and_Vector_Object_Count: 626
Spatial_Reference_Information:
Horizontal_Coordinate_System_Definition:
Planar:
Grid_Coordinate_System:
Grid_Coordinate_System_Name: Universal Transverse Mercator
Universal_Transverse_Mercator:
UTM_Zone_Number: 12
Transverse_Mercator:
Scale_Factor_at_Central_Meridian: 0.9996
Longitude_of_Central_Meridian: -105
Latitude_of_Projection_Origin: 0.0
False_Easting: 500000
False_Northing: 0.0
Planar_Coordinate_Information:
Planar_Coordinate_Encoding_Method: coordinate pair
Coordinate_Representation:
Abscissa_Resolution: 1
Ordinate_Resolution: 1
Planar_Distance_Units: meters
Geodetic_Model:
Horizontal_Datum_Name: NAD27
Ellipsoid_Name: Clarke 1866
Semi-major_Axis: 6378206.4
Denominator_of_Flattening_Ratio: 294.98
Entity_and_Attribute_Information:
Detailed_Description:
Entity_Type:
Entity_Type_Label: HR_POLY.PAT
Entity_Type_Definition: attribute table of hr_poly
Entity_Type_Definition_Source: ARC/INFO
Attribute:
Attribute_Label: PTYPE
Attribute_Definition: Geologic unit label
Attribute_Definition_Source: author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: Pc
Enumerated_Domain_Value_Definition: Coconino Sandstone
Enumerated_Domain_Value_Definition_Source: Author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: Ph
Enumerated_Domain_Value_Definition: Hermit Formation
Enumerated_Domain_Value_Definition_Source: Author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: Pkf
Enumerated_Domain_Value_Definition: Kaibab Formation Fossil Mountain member
Enumerated_Domain_Value_Definition_Source: Author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: Pkh
Enumerated_Domain_Value_Definition: Kaibab Formation Harrisburg member
Enumerated_Domain_Value_Definition_Source: Author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: Ptb
Enumerated_Domain_Value_Definition: Toroweap Formation Brady Canyon member
Enumerated_Domain_Value_Definition_Source: Author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: Pts
Enumerated_Domain_Value_Definition: Toroweap Formation Seligman member
Enumerated_Domain_Value_Definition_Source: Author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: Ptw
Enumerated_Domain_Value_Definition: Toroweap Formation Woods Ranch member
Enumerated_Domain_Value_Definition_Source: Author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: Qa1
Enumerated_Domain_Value_Definition: Young alluvial fan deposits
Enumerated_Domain_Value_Definition_Source: Author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: Qa2
Enumerated_Domain_Value_Definition: Young intermediate age alluvial fan deposits
Enumerated_Domain_Value_Definition_Source: Author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: Qa3
Enumerated_Domain_Value_Definition: Older intermediate age alluvial fan deposits
Enumerated_Domain_Value_Definition_Source: Author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: Qa4
Enumerated_Domain_Value_Definition: Older alluvial fan deposits
Enumerated_Domain_Value_Definition_Source: Author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: Qaf
Enumerated_Domain_Value_Definition: Artificial deposits
Enumerated_Domain_Value_Definition_Source: Author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: Qd
Enumerated_Domain_Value_Definition: Sheet-sand and dune deposits
Enumerated_Domain_Value_Definition_Source: Author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: Qg1
Enumerated_Domain_Value_Definition: Young terrace gravel deposits
Enumerated_Domain_Value_Definition_Source: Author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: Qg2
Enumerated_Domain_Value_Definition: Intermediate terrace gravel deposits
Enumerated_Domain_Value_Definition_Source: Author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: Ql
Enumerated_Domain_Value_Definition: Landslide deposits
Enumerated_Domain_Value_Definition_Source: Author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: Qs
Enumerated_Domain_Value_Definition: Stream-channel alluvium
Enumerated_Domain_Value_Definition_Source: Author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: Qt
Enumerated_Domain_Value_Definition: Talus deposits
Enumerated_Domain_Value_Definition_Source: Author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: Qv
Enumerated_Domain_Value_Definition: Valley-fill deposits
Enumerated_Domain_Value_Definition_Source: Author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: TRcp
Enumerated_Domain_Value_Definition: Chinle Formation Petrified Forest member
Enumerated_Domain_Value_Definition_Source: Author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: TRm
Enumerated_Domain_Value_Definition: Moenkopi Formation, undivided
Enumerated_Domain_Value_Definition_Source: Author
Attribute:
Attribute_Label: PATTERN
Attribute_Definition: Graphic fill pattern
Attribute_Definition_Source: Author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: 0
Enumerated_Domain_Value_Definition: No fill pattern in poly/region
Enumerated_Domain_Value_Definition_Source: Author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: 4
Enumerated_Domain_Value_Definition: Breccia fill pattern
Enumerated_Domain_Value_Definition_Source: Computed for all PTYPEs = Ql
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: 516
Enumerated_Domain_Value_Definition: Dense circle fill pattern
Enumerated_Domain_Value_Definition_Source: Computed for all PTYPEs = Qg2
Detailed_Description:
Entity_Type:
Entity_Type_Label: HR_POLY.AAT
Entity_Type_Definition: attribute table of hr_poly
Entity_Type_Definition_Source: ARC/INFO
Attribute:
Attribute_Label: LTYPE
Attribute_Definition:
Type of geologic or geographic feature denoted by a line in the database.
Attribute_Definition_Source: author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: contact_certain
Enumerated_Domain_Value_Definition:
Boundary between two mapped units that retains the original depositional or intrusive relationship. The contact has been observed or is closely constrained, so it is well located as described in Positional_Accuracy.
Enumerated_Domain_Value_Definition_Source: Author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: high_angle_flt_certain
Enumerated_Domain_Value_Definition:
Structural boundary between mapped units or structural discontinuity within a mapped unit that has experienced relative offset between the rock bodies on either side of the fault. The fault has been observed or is closely constrained, so it is well located as described in Positional_Accuracy.
Enumerated_Domain_Value_Definition_Source: Author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: high_angle_flt_concealed
Enumerated_Domain_Value_Definition:
Structural boundary between mapped units or structural discontinuity withina mapped unit that has experienced relative offset between the rok bodies on either side of the fault. The fault is obscured by overlying mapped units, so it is not well-located as described in Positional_Accuracy, but the location isconstrained to be within 3 mm at mapscale or within about 95 meters on the ground
Enumerated_Domain_Value_Definition_Source: Author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: map_boundary
Enumerated_Domain_Value_Definition:
Edge of the mapped area. Used primarily to bound polygons at the edge of the map database. The location of the boundary is well located as described in positional_accuracy.
Enumerated_Domain_Value_Definition_Source: Author
Attribute:
Attribute_Label: PTTYPE
Attribute_Definition: arc marker point type
Attribute_Definition_Source: author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: fault_ball_fill
Enumerated_Domain_Value_Definition:
Arcmarker attached to an arc describing the nature of displacement along a fault. Side of arc with bar and ball is the side with downthrown displacement.
Enumerated_Domain_Value_Definition_Source: Author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: xx
Enumerated_Domain_Value_Definition:
No arcmarker is to be attached to an arc containing the xx value in the PTTYPE field.
Enumerated_Domain_Value_Definition_Source: Author
Detailed_Description:
Entity_Type:
Entity_Type_Label: HR_FOLD.AAT
Entity_Type_Definition: Attribute table of HR_FOLD
Entity_Type_Definition_Source: ARC/INFO
Attribute:
Attribute_Label: LTYPE
Attribute_Definition:
Type of geologic or geographic feature denoted by a line in the database.
Attribute_Definition_Source: author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: anticline_certain
Enumerated_Domain_Value_Definition:
The surface trace of the axis of an anticline. The axis cannot been observed, but the location is constrained to be within about 3 mm at map scale or within about 72 meters on the ground.
Enumerated_Domain_Value_Definition_Source: author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: monocline_certain
Enumerated_Domain_Value_Definition:
The surface trace of the axis of a monocline. The axis cannot been observed, but the location is constrained to be within about 3 mm at map scale or within about 72 meters on the ground.
Enumerated_Domain_Value_Definition_Source: author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: monocline_concealed
Enumerated_Domain_Value_Definition:
The surface trace of the axis of a monocline. The axis cannot been observed, but the location is constrained to be within about 3 mm at map scale or within about 72 meters on the ground. The axis is concealed by younger units unaffected by earlier folding.
Enumerated_Domain_Value_Definition_Source: author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: syncline_certain
Enumerated_Domain_Value_Definition:
The surface trace of the axis of a syncline. The axis cannot been observed, but the location is constrained to be within about 3 mm at map scale or within about 72 meters on the ground.
Enumerated_Domain_Value_Definition_Source: author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: syncline_concealed
Enumerated_Domain_Value_Definition:
The surface trace of the axis of a syncline. The axis cannot been observed, but the location is constrained to be within about 3 mm at map scale or within about 72 meters on the ground. The axis is concealed by younger units unaffected by earlier folding.
Enumerated_Domain_Value_Definition_Source: author
Attribute:
Attribute_Label: PTTYPE
Attribute_Definition: Arc marker point type
Attribute_Definition_Source: author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: anticline
Enumerated_Domain_Value_Definition:
Point element placed on line indicating the anticlinal nature of the particular fold axis. Defined only in conjunction with an LTYPE of anticline_certain
Enumerated_Domain_Value_Definition_Source: author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: monocline
Enumerated_Domain_Value_Definition:
Point element placed on line indicating the monoclinal nature of the particular fold axis. Defined only in conjunction with an LTYPE of monocline_concealed or monocline_certain
Enumerated_Domain_Value_Definition_Source: author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: syncline
Enumerated_Domain_Value_Definition:
Point element placed on line indicating the synclinal nature of the particular fold axis. Defined only in conjunction wiht an LTYPE of syncline_certain or syncline_concealed
Enumerated_Domain_Value_Definition_Source: author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: xx
Enumerated_Domain_Value_Definition:
No point element is to be placed on an arc with PTTYPE defined as xx
Enumerated_Domain_Value_Definition_Source: author
Attribute:
Attribute_Label: PLUNGE
Attribute_Definition:
The inclination of a fold axis if obviously tilted in one or many directions
Attribute_Definition_Source: author
Attribute_Domain_Values:
Range_Domain:
Range_Domain_Minimum: 0
Range_Domain_Maximum: 90
Attribute_Units_of_Measure: degrees
Attribute_Measurement_Resolution: 1
Detailed_Description:
Entity_Type:
Entity_Type_Label: HR_DIP.PAT
Entity_Type_Definition: Attribute table of HR_DIP
Entity_Type_Definition_Source: ARC/INFO
Attribute:
Attribute_Label: PTTYPE
Attribute_Definition:
The type of planar feature which was observed and the orientation of which was measured at this point.
Attribute_Definition_Source: author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: bedding
Enumerated_Domain_Value_Definition:
Originally horizontal sedimentary layers were observed and measured at this point.
Enumerated_Domain_Value_Definition_Source: author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: collapse
Enumerated_Domain_Value_Definition:
A probable breccia pipe collapse structure was observed at this location
Enumerated_Domain_Value_Definition_Source: author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: dome
Enumerated_Domain_Value_Definition:
Originally horizonal sedimentary layers all dipping away from center were observed at this location
Enumerated_Domain_Value_Definition_Source: author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: sinkhole
Enumerated_Domain_Value_Definition: Observed location of an enclosed depression or cave
Enumerated_Domain_Value_Definition_Source: author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: vertical_joint
Enumerated_Domain_Value_Definition:
The orientation of vertical rock fractures without displacement was measured at this point.
Enumerated_Domain_Value_Definition_Source: author
Attribute:
Attribute_Label: DIP
Attribute_Definition:
The inclination of planar structures measured in degrees down from horizontal.
Attribute_Definition_Source: author
Attribute_Domain_Values:
Range_Domain:
Range_Domain_Minimum: 0
Range_Domain_Maximum: 90
Attribute_Units_of_Measure: degrees
Attribute_Measurement_Resolution: 1
Attribute:
Attribute_Label: STRIKE
Attribute_Definition:
The orientation of a horizontal line in an inclined planar structure measured in degrees clockwise from north.
Attribute_Definition_Source: author
Attribute_Domain_Values:
Range_Domain:
Range_Domain_Minimum: 0
Range_Domain_Maximum: 359
Attribute_Units_of_Measure: degrees
Attribute_Measurement_Resolution: 1
Overview_Description:
Entity_and_Attribute_Overview:
The databases described in this report were compiled in ARC/INFO, a commercial Geographic Information System by Environmental Systems Research Institute. Almost all the attributes in the various attribute tables of the coverages included in the report are set or calculated by ARC/INFO. The exceptions being <COVER>-ID, LTYPE, PTYPE, PTTYPE, PATTERN, STRIKE, and DIP. LTYPE, PTYPE and PTTYPE are author added aspects of the coverages added to the PAT or AAT and are used to describe the type of line (LTYPE), area (PTYPE), point or arcmarker (PTTYPE). LTYPE and PTTYPE are each defined with WIDTH 35, OUTPUT 35, and TYPE C (character). PTYPE is defined with WIDTH 5, OUTPUT 5, and TYPE C. STRIKE and DIP are only present in HR_DIP.PAT, because they describe bedding orientation of point objects. Each is defined with WIDTH and OUTPUT of 3, and TYPE I (integer). PATTERN was another author-added attribute only in HR_POLY.PAT, and is defined by WIDTH 3, OUTPUT 3, and TYPE I. The data in PATTERN correlates directly with specific values in the PTYPE field. One coverage not described is HR_ANNO. This coverage contains only annotations, and leader placement. There are no defined attributes for this coverage.
Entity_and_Attribute_Detail_Citation:
The report combined with hrmap.eps, hrmap.pdf, hrgeo.doc, hrgeo.txt or hrgeo.pdf
Distribution_Information:
Distributor:
Contact_Information:
Contact_Organization_Primary:
Contact_Organization: USGS Information Services
Contact_Address:
Address_Type: mailing address
Address: Box 25286, Denver Federal Center
City: Denver
State_or_Province: CO
Postal_Code: 80225-0046
Country: USA
Contact_Voice_Telephone: (303) 202-4200
Contact_Voice_Telephone: 1-888-ASK-USGS
Contact_Facsimile_Telephone: (303) 202-4695
Contact_Electronic_Mail_Address: infoservices@usgs.gov
Resource_Description: USGS MF-2364
Distribution_Liability:
Any use of trade, product of firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government. Although this publication has been subjected to rigorous review and is substantially complete, the USGS reserves the right to revise the data pursuant to further analysis and review. Furthermore, it is released on condition that neither the USGS nor the United States Government may be held liable for any damages resulting from its authorized or unauthorized use.
Standard_Order_Process:
Digital_Form:
Digital_Transfer_Information:
Format_Name: ARCE
Format_Specification: 7.2.1
Format_Information_Content: Geologic units and structural features
File_Decompression_Technique: unzip
Transfer_Size: 9
Digital_Transfer_Option:
Online_Option:
Computer_Contact_Information:
Network_Address:
Digital_Form:
Digital_Transfer_Information:
Format_Name: Shapefile
Format_Specification: 1.0
Format_Information_Content: Geologic units and structural features
File_Decompression_Technique: unzip
Transfer_Size: 2.7
Digital_Transfer_Option:
Online_Option:
Computer_Contact_Information:
Network_Address:
Fees: none
Metadata_Reference_Information:
Metadata_Date: 20160205
Metadata_Contact:
Contact_Information:
Contact_Person_Primary:
Contact_Person: Peter N Schweitzer
Contact_Organization: USGS Midwest Area
Contact_Position:
Collection manager, USGS Geoscience Data Clearinghouse, http://geo-nsdi.er.usgs.gov/
Contact_Address:
Address_Type: mailing address
Address:
Mail Stop 954
12201 Sunrise Valley Dr
City: Reston
State_or_Province: VA
Postal_Code: 20192-0002
Country: USA
Contact_Voice_Telephone: 703-648-6533
Contact_Facsimile_Telephone: 703-648-6252
Contact_Electronic_Mail_Address: pschweitzer@usgs.gov
Metadata_Standard_Name: Content Standards for Digital Geospatial Metadata
Metadata_Standard_Version: FGDC-STD-001-1998

This page is <https://geo-nsdi.er.usgs.gov/metadata/map-mf/2364/metadata.html>
Generated by mp version 2.9.48 on Tue Jul 03 20:05:07 2018