Geologic map of the Cape Mendocino, Eureka, Garberville, and southwestern part of the Hayfork 30 X 60 Quadrangles and Adjacent Offshore Area, Northern California

Metadata also available as - [Questions & Answers] - [Parseable text] - [XML]

Metadata:

Identification_Information:
Citation:
Citation_Information:
Originator: McLaughlin, R.J.
Originator: Ellen, S.D.
Originator: Blake, M.C.
Originator: Jayko, A.S.
Originator: Irwin, W.P.
Originator: Aalto, K.R.
Originator: Carver, G.A.
Originator: Clarke, S.H., Jr.
Originator: Barnes, J.B.
Originator: Cecil, J.D.
Originator: Cyr, K.A.
Publication_Date: 2000
Title:
Geologic map of the Cape Mendocino, Eureka, Garberville, and southwestern part of the Hayfork 30 X 60 Quadrangles and Adjacent Offshore Area, Northern California
Edition: 1.0
Geospatial_Data_Presentation_Form: geologic map
Series_Information:
Series_Name: U.S. Geological Survey Miscellaneous Field Studies Map
Issue_Identification: 2336
Publication_Information:
Publication_Place: Menlo Park, CA
Publisher: U.S. Geological Survey
Online_Linkage: http://pubs.usgs.gov/mf/2000/2336/
Description:
Abstract:
This digital map database, compiled from previously published and unpublished data, and new mapping by the authors, represents the general distribution of bedrock and surficial deposits in the mapped area. Together with the accompanying text file (ceghmf.ps, ceghmf.pdf, ceghmf.txt), it provides current information on the geologic structure and stratigraphy of the area covered. The database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U.S. Geological Survey. The scale of the source maps limits the spatial resolution (scale) of the database to 1:100,000 or smaller.
Purpose:
This database and accompanying plot files depict the distribution of geologic materials and structures at a regional (1:100,000) scale. The report is intended to provide geologic information for the regional study of materials properties, earthquake shaking, landslide potential, mineral hazards, seismic velocity, and earthquake faults. In addition, the report contains new information and interpretations about the regional geologic history and framework. However, the regional scale of this report does not provide sufficient detail for site development purposes. In addition, this map does not take the place of fault-rupture hazard zones designated by the California State Geologist (Hart and Bryant, 1997). Similarly, the database cannot be used to identify or delineate landslides in the region.
Supplemental_Information:
This is the pre-release version of the report. The accompanying text file mf2336.rev contains version numbers for each part of the data set.
This report consists of a set of geologic map database files (Arc/ Info coverages) and supporting text and plotfiles. In addition, the report includes two sets of plotfiles (PostScript and PDF format) that will generate map sheets and pamphlets similar to a traditional USGS Miscellaneous Field Studies Report. These files are described in the explanatory pamphlets (ceghdesc and ceghdb). The base map layer used in the preparation of the geologic map plotfiles was downloaded from the web (www.gisdatadepot.com) as Digital Raster Graphic files of scale-stable versions of the USGS 1:100,000 topographic maps and coverted to TIFF images which were then converted to GRIDs. These grids contain no database information other than position, and are included for reference only. The base maps used were the Cape Mendocino (1989 edition), Eureka (1987 edition), Garberville (1979 edition), Hayfork (1978 edition) 1:100,000 topographic maps, which all have a 50-meter contour interval. The bathymetry maps were converted from the Coast and Geodetic Survey hydrographic chart 1308 N-12, 1969.
Time_Period_of_Content:
Time_Period_Information:
Single_Date/Time:
Calendar_Date: 2000
Currentness_Reference:
The date given is the publication date. The information in the report is the most up-to-date available at the time of publication.
Status:
Progress: Pre-Publication
Maintenance_and_Update_Frequency: As needed
Spatial_Domain:
Bounding_Coordinates:
West_Bounding_Coordinate: -125.02988586
East_Bounding_Coordinate: -123
North_Bounding_Coordinate: 41.01735316
South_Bounding_Coordinate: 39.98265351
Keywords:
Theme:
Theme_Keyword_Thesaurus: USGS Thesaurus
Theme_Keyword: structural geology
Theme_Keyword: stratigraphy
Theme_Keyword: faulting (geologic)
Theme_Keyword: folding (geologic)
Theme_Keyword: geologic maps
Theme_Keyword: bedrock geologic units
Theme_Keyword: geologic structure
Theme_Keyword: geologic history
Theme_Keyword: tectonic processes
Theme_Keyword: geospatial datasets
Theme:
Theme_Keyword_Thesaurus: ISO 19115 Topic Categories
Theme_Keyword: geoscientificInformation
Theme:
Theme_Keyword_Thesaurus: none
Theme_Keyword: geology
Theme_Keyword: bedrock geology
Theme_Keyword: surficial geology
Theme_Keyword: geologic history
Theme_Keyword: Franciscan complex
Theme_Keyword: Coast Range ophiolite
Theme_Keyword: Great Valley sequence
Theme_Keyword: stratigraphic assemblages
Theme_Keyword: geologic structures
Theme_Keyword: South Fork fault
Theme_Keyword: Pine Butte fault
Theme_Keyword: Red Mountain fault
Theme_Keyword: Mule Ridge fault
Theme_Keyword: Grogan fault
Theme_Keyword: Coast Range fault
Theme_Keyword: Sulphur Creek thrust
Theme_Keyword: Coastal belt thrust
Theme_Keyword: Cascadia Megathrust
Theme_Keyword: Cascadia Subduction zone
Theme_Keyword: Mendocino fracture zone
Theme_Keyword: San Andreas fault
Theme_Keyword: Mad River fault zone
Theme_Keyword: Little Salmon fault
Theme_Keyword: Russ fault
Theme_Keyword: Bear River fault zone
Theme_Keyword: Garberville fault zone
Theme_Keyword: Mattole Road lineament
Theme_Keyword: North Fork Road Thrust
Theme_Keyword: King Range thrust zone
Theme_Keyword: Pacific-North American Plate boundary
Theme_Keyword: Mendocino Uplift
Theme_Keyword: Mendocino Triple junction
Theme_Keyword: Pacific Plate
Theme_Keyword: Gorda Plate
Theme_Keyword: North American Plate
Theme_Keyword: Petrolia earthquake
Theme_Keyword: Honeydew earthquake
Place:
Place_Keyword_Thesaurus: none
Place_Keyword: United States of America
Place_Keyword: California
Place_Keyword: Humbolt County County
Place_Keyword: Mendocino County
Place_Keyword: Trinity County
Place_Keyword: Tehama County
Stratum:
Stratum_Keyword_Thesaurus: None
Stratum_Keyword: Alluvial deposits
Stratum_Keyword: Marine shoreline and aolian deposits
Stratum_Keyword: Undifferentiated nonmarine terrace deposits
Stratum_Keyword: Older alluvium
Stratum_Keyword: Marine and non-marine overlap deposits
Stratum_Keyword: Volcanic Rocks of Fickle Hill
Stratum_Keyword: Franciscan Complex
Stratum_Keyword: Coastal belt
Stratum_Keyword: Coastal Terrane
Stratum_Keyword: King Range Terrane
Stratum_Keyword: Igneous and sedimnetary rocks of Pt. Delgada
Stratum_Keyword: Sandstone and argillite of King Peak
Stratum_Keyword: False Cape Terrane
Stratum_Keyword: Cantral belt
Stratum_Keyword: melange of Central belt
Stratum_Keyword: Yager Terrane
Stratum_Keyword: Unnamed metasandstone and meta-argillite
Stratum_Keyword: Landslide deposits
Stratum_Keyword: White Rock metasandstone
Stratum_Keyword: Haman Ridge graywacke
Stratum_Keyword: Fort Seward metasandstone
Stratum_Keyword: Limestone
Stratum_Keyword: Chert
Stratum_Keyword: basaltic rocks
Stratum_Keyword: Undivided blueschist blocks
Stratum_Keyword: Greenstone
Stratum_Keyword: metachert
Stratum_Keyword: metasandstone of Yolla Bolly terrane, undivided
Stratum_Keyword: melange block, lithology unknown
Stratum_Keyword: Eastern belt
Stratum_Keyword: Pickett Peak terrane
Stratum_Keyword: South Fork Mountain Schist
Stratum_Keyword: Chinquapin metabasalt member
Stratum_Keyword: Valantine Springs Formation
Stratum_Keyword: metabasalt and minor metachert
Stratum_Keyword: Yolla Bolly Terrane
Stratum_Keyword: Taliaferno Metamorphic Complex
Stratum_Keyword: Chicago Rock melange
Stratum_Keyword: Metagraywacke of Hammerhorn Ridge
Stratum_Keyword: serpentinite
Stratum_Keyword: Devils Hole Ridge Broken Formation
Stratum_Keyword: Little Indian Valley argillite
Stratum_Keyword: Rocks of the Yolla Bolly Terrane, undivided
Stratum_Keyword: Elder Creek(?) Terrane
Stratum_Keyword: mudstone
Stratum_Keyword: layered gabbro
Stratum_Keyword: serpentinite melange
Stratum_Keyword: Del Puerto(?) Terrane
Stratum_Keyword: Mudstone
Stratum_Keyword: tuffaceous chert
Stratum_Keyword: Basaltic flows and keratophyric tuff
Stratum_Keyword: Diabase
Stratum_Keyword: Undivided serpentinized ultramafic rocks
Stratum_Keyword: Undivided Great Valley Sequence
Stratum_Keyword: sedimentary rocks
Stratum_Keyword: Hayfork Terrane
Stratum_Keyword: Eastern Hayfork subterrane
Stratum_Keyword: melange and broken formation
Stratum_Keyword: Limestone
Stratum_Keyword: Western Hayfork subterrane
Stratum_Keyword: Hayfork Bally meta-andesite, undivided
Stratum_Keyword: Wildwood pluton
Stratum_Keyword: clinopyroxenite
Stratum_Keyword: Diorite and gabbro plutons
Stratum_Keyword: Rattlesnake Creek Terrane
Stratum_Keyword: melange
Stratum_Keyword: amphibolite
Stratum_Keyword: Intermediate to silicic volcanic rocks
Stratum_Keyword: Intrusive complex
Stratum_Keyword: Plutonic rocks
Stratum_Keyword: Ultramafic rocks
Stratum_Keyword: Western Klamath Terrane
Stratum_Keyword: Smith River subterrane
Stratum_Keyword: Galice(?) Formation
Stratum_Keyword: pyroclastic andesite
Stratum_Keyword: Glen Creek gabbro-ultramafic complex
Stratum_Keyword: Serpentinized peridotite
Temporal:
Temporal_Keyword_Thesaurus: None
Temporal_Keyword: Mesozoic
Temporal_Keyword: Jurassic
Temporal_Keyword: Cretaceous
Temporal_Keyword: Cenozoic
Temporal_Keyword: Tertiary
Temporal_Keyword: Neogene
Temporal_Keyword: Miocene
Temporal_Keyword: Pliocene
Temporal_Keyword: Quaternary
Temporal_Keyword: Pleistocene
Temporal_Keyword: Holocene
Place:
Place_Keyword_Thesaurus: Augmented FIPS 10-4 and FIPS 6-4
Place_Keyword: f06023 = Humboldt
Place_Keyword: f06045 = Mendocino
Place_Keyword: f06103 = Tehama
Place_Keyword: f06105 = Trinity
Theme:
Theme_Keyword_Thesaurus: USGS Thesaurus
Theme_Keyword: structural geology
Theme_Keyword: stratigraphy
Theme_Keyword: faults
Theme_Keyword: folds (geologic)
Theme_Keyword: geologic maps
Theme_Keyword: rock types
Theme:
Theme_Keyword_Thesaurus: ISO 19115 Topic Categories
Theme_Keyword: geoscientificInformation
Access_Constraints: None
Use_Constraints:
Uses of this digital geologic map should not violate the spatial resolution of the data. Although the digital form of the data removes the constraint imposed by the scale of a paper map, the detail and accuracy inherent in map scale are also present in the digital data. The fact that this database was edited for a scale of 1:100,000 means that higher resolution information is not present in the dataset. Plotting at scales larger than 1:100,000 will not yield greater real detail, although it may reveal fine-scale irregularities below the intended resolution of the database. Similarly, where this database is used in combination with other data of higher resolution, the resolution of the combined output will be limited by the lower resolution of these data.
Point_of_Contact:
Contact_Information:
Contact_Organization_Primary:
Contact_Organization: USGS Western Geologic Mapping Team
Contact_Person: Database coordinator
Contact_Address:
Address_Type: mailing address
Address: 345 Middlefield Road, MS 975
City: Menlo Park
State_or_Province: CA
Postal_Code: 94025
Country: USA
Data_Set_Credit:
The authors are grateful to the following paleontologists of the U.S. Geological Survey, academia and the private sector, for their substantial contributions towards the understanding of the geology of the map area: S.A. Kling (Micro-Paleo Consultants), Cenozoic and Mesozoic radiolaria; J.A. Barron (USGS), Tertiary diatoms; K. McDougall (USGS), Tertiary benthic foraminifers; R.Z. Poove (USGS), Tertiary planktonic foraminifers; W.R. Evitt (Stanford University), Mesozoic and Tertiary dinoflagellates and pollen; W.V. Sliter (USGS), Mesozoic and early Tertiary foraminifers; G. Keller (Princeton University), Tertiary foraminifers; N.O. Frederikson (USGS), Mesozoic and Tertiary spores and pollen; B. Roth (consultant; formerly California Academy of Sciences), late Tertiary marine mollusks; C.L. Powell (USGS), marine mollusks; D. Bukry (USGS), Tertiary nannoplankton; D.L. Jones (USGS and UC Berkeley), Mesozoic Macrofossils; B. Murchey (USGS), Mesozoic radiolaria; C. Blome ( USGS), Mesozoic radiolaria; R. Feldman (Kent State University, Ohio), Cenozoic Crustacea; J. Clark (consultant), Mesozoic and Tertiary dinoflagellates; Y. Isozaki (Tokyo Institute of Technology, Japan), Mesozoic radiolaria; P. Baumgartner (Universite de Lausanne, Lausanne, Switzerland), Mesozoic radiolaria.
The first author acknowledges R.G. Stanley, L. Magoon, T. Lorenson, and P. Lillis of the USGS, and M.B. Underwood (University of Missouri, Columbia, MO) for insights on structure and stratigraphy from petroleum source-rock investigations in the Mendocino triple junction region in 1997 and 1998.
We are grateful to D. Harwood (USGS) and D. Howell (USGS) for their thorough scientific reviews of these maps as well as their willness to return them to us in a timely manner.
We are very grateful to R. Graymer, Zenon Valin, and C. Wentworth for help and advice in the digital preparation and formatting of these maps for publication. We also thank R. Graymer for his careful digital review. We thank J. Zigler of the USGS Western Publications Group for her careful editing which substantially improved this report. Finally, we greatfully acknowledge the help of M. Reid (USGS and Chairman of the Mass wasting Scientific Review Panel), and L.J.P. Muffler (Regional Geologist for the Western Region of the USGS), for bringing attention to the existence of this database for addressing habitat, mass wasting and other issues in northwestern California.
Note: Authorship of the geology of this publication resides in the first eight names in the author list in the order given. The last three names starting with J.B. Barnes, are the digital database authors in the order given.
Native_Data_Set_Environment: SunOS, 5.5.1, sun4u UNIX, ARC/INFO version 7.2.1
Data_Quality_Information:
Attribute_Accuracy:
Attribute_Accuracy_Report:
This report has undergone two scientific peer reviews, one digital database review, one review for conformity with geologic names policy, and review of the plotfiles for conformity with USGS map standards.
Logical_Consistency_Report: Polygon and chain-node topology present
Completeness_Report:
The report is intended to describe completely the surficial deposits and bedrock geology at 1:100,000 scale. Geologic information only mappable at larger scale has been omitted. In addition, landslide deposits are for the most part not recorded.
Positional_Accuracy:
Horizontal_Positional_Accuracy:
Horizontal_Positional_Accuracy_Report:
Well located data items are intended to have a horizontal positional accuracy within .5 mm at 1:100,000 scale, or within 50 meters on the ground. The general positional accuracy of each line in the database is indicated within the LTYPE field in the Arc Attribute Table (see below). Points in the database are generally considered to be well located. The position of each data item is derived from the USGS topographic base map, and therefore additional inaccuracies arising from inaccuracies in the base map may also be encountered.
Lineage:
Process_Step:
Process_Description:
The databases in this report were compiled in ARC/INFO, a commercial Geographic Information System (Environmental Systems Research Institute, Redlands, California), with version 3.0 of the menu interface ALACARTE (Fitzgibbon and Wentworth, 1991, Fitzgibbon, 1991, Wentworth and Fitzgibbon, 1991). The files are in either GRID (ARC/INFO raster data) format or COVERAGE (ARC/INFO vector data) format. Coverages are stored in uncompressed ARC export format (ARC/INFO version 7.x). ARC/INFO export files (files with the .e00 extension) can be converted into ARC/INFO coverages in ARC/INFO (see below) and can be read by some other Geographic Information Systems, such as MapInfo via ArcLink and ESRI's ArcView (version 1.0 for Windows 3.1 to 3.11 is available for free from ESRI's web site: http://www.esri.com). The digital compilation was done in version 7.2.1 of ARC/INFO with version 3.0 of the menu interface ALACARTE (Fitzgibbon and Wentworth, 1991, Fitzgibbon, 1991, Wentworth and Fitzgibbon, 1991). The geologic map information was digitized from stable originals of the geologic maps at 1:100,000 scale. The author manuscripts (pen on mylar) were scanned using a Altek monochrome scanner with a resolution of 800 dots per inch. The scanned images were vectorized and transformed from scanner coordinates to projection coordinates with digital tics placed by hand at quadrangle corners. The scanned lines were edited interactively by hand using ALACARTE, color boundaries were tagged as appropriate, and some scanning artifacts visible at 1:24,000 were removed.
Process_Step:
Process_Description:
Geologic linework was scanned, converted to vector data, and edited on-screen to repair errors visible at map scale. Polygon topology was created and each polygon tagged on-screen. Structural information was digitized by hand using a digitizing table. Plotfiles were created in ArcPlot.
Process_Step:
Process_Description: Creation of original metadata record
Process_Date: 20090902
Process_Contact:
Contact_Information:
Contact_Person_Primary:
Contact_Person: J.B. Barnes
Contact_Organization: U.S. Geological Survey
Contact_Address:
Address_Type: Mailing
Address: 345 Middlefield Rd., M/S 975
City: Menlo Park
State_or_Province: CA
Postal_Code: 94025
Country: USA
Spatial_Data_Organization_Information:
Direct_Spatial_Reference_Method: Vector
Point_and_Vector_Object_Information:
SDTS_Terms_Description:
SDTS_Point_and_Vector_Object_Type: Point
SDTS_Terms_Description:
SDTS_Point_and_Vector_Object_Type: String
SDTS_Terms_Description:
SDTS_Point_and_Vector_Object_Type: GT-polygon composed of chains
Spatial_Reference_Information:
Horizontal_Coordinate_System_Definition:
Planar:
Grid_Coordinate_System:
Grid_Coordinate_System_Name: Universal Transverse Mercator
Universal_Transverse_Mercator:
UTM_Zone_Number: 10
Transverse_Mercator:
Scale_Factor_at_Central_Meridian: 0.9996
Longitude_of_Central_Meridian: -123
Latitude_of_Projection_Origin: 0.0
False_Easting: 500000
False_Northing: 0
Planar_Coordinate_Information:
Planar_Coordinate_Encoding_Method: coordinate pair
Coordinate_Representation:
Abscissa_Resolution: 1.0
Ordinate_Resolution: 1.0
Planar_Distance_Units: METERS
Geodetic_Model:
Horizontal_Datum_Name: NAD27
Ellipsoid_Name: Clarke 1866
Semi-major_Axis: 6378206.4
Denominator_of_Flattening_Ratio: 294.98
Entity_and_Attribute_Information:
Detailed_Description:
Entity_Type:
Entity_Type_Label: CEGH-GEO.PAT
Entity_Type_Definition: Attribute table of CEGH-GEO.PAT.
Entity_Type_Definition_Source: ARC/INFO
Attribute:
Attribute_Label: PTYPE
Attribute_Definition: Geologic unit label
Attribute_Definition_Source: author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: Krp
Enumerated_Domain_Value_Definition: Igneous and Sedimentary rocks of Point Delgada
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: Ks
Enumerated_Domain_Value_Definition: Sedimentary rocks
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: QTog
Enumerated_Domain_Value_Definition: Older alluvium
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: QTw
Enumerated_Domain_Value_Definition: Marine and non-Marine overlap deposits
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: Qal
Enumerated_Domain_Value_Definition: Alluvial deposits
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: Qls
Enumerated_Domain_Value_Definition: Landslide deposits
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: Qm
Enumerated_Domain_Value_Definition: Undeformed marine shoreline and Aolian deposits
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: Qt
Enumerated_Domain_Value_Definition: Undifferentiated nonmarine terrace deposits
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: Ti
Enumerated_Domain_Value_Definition: Volcanic rocks of Fickle Hill
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: Ycgl
Enumerated_Domain_Value_Definition: Yager Terrane
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: am
Enumerated_Domain_Value_Definition: Amphibolite
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: b
Enumerated_Domain_Value_Definition: Melange block, lithology unknown
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: blank
Enumerated_Domain_Value_Definition: unmapped area
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: bs
Enumerated_Domain_Value_Definition: basaltic rocks
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: c
Enumerated_Domain_Value_Definition: Metachert
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: cb1
Enumerated_Domain_Value_Definition: Subunit of unnamed Metasandstone and meta-argillite
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: cb2
Enumerated_Domain_Value_Definition: Subunit of unnamed Metasandstone and meta-argillite
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: cc
Enumerated_Domain_Value_Definition: Chert
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: cfs
Enumerated_Domain_Value_Definition: Fort Steward Metasandstone
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: chr
Enumerated_Domain_Value_Definition: Haman Ridge graywacke
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: cls
Enumerated_Domain_Value_Definition: Limestone
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: cm1
Enumerated_Domain_Value_Definition: Subunit of unnamed Metasandstone and meta-argillite
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: cm2
Enumerated_Domain_Value_Definition: Subunit of unnamed Metasandstone and meta-argillite
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: co1
Enumerated_Domain_Value_Definition: Subunit of Coastal Terrane
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: co2
Enumerated_Domain_Value_Definition: Subunit of Coastal Terrane
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: co3
Enumerated_Domain_Value_Definition: Subunit of Coastal Terrane
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: co4
Enumerated_Domain_Value_Definition: Subunit of Coastal Terrane
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: cob
Enumerated_Domain_Value_Definition: Minor mapped lithologies of the Coastal Terrane
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: cols
Enumerated_Domain_Value_Definition: Limestone in the Coastal Terrane
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: cwr
Enumerated_Domain_Value_Definition: White Rock metasandstone
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: dpb
Enumerated_Domain_Value_Definition: Basaltic flows and keratophyric tuff
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: dpd
Enumerated_Domain_Value_Definition: Diabase
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: dpms
Enumerated_Domain_Value_Definition: Mudstone
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: dpsp
Enumerated_Domain_Value_Definition: Serpentinite melange
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: dpt
Enumerated_Domain_Value_Definition: Tuffaceous chert
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: ecg
Enumerated_Domain_Value_Definition: Layered gabbro
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: ecms
Enumerated_Domain_Value_Definition: Elder Creek Terrane mudstone
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: ecsp
Enumerated_Domain_Value_Definition: Serpentintite melange
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: eh
Enumerated_Domain_Value_Definition: Eastern Hayfork subterrane melange and broken formation
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: ehls
Enumerated_Domain_Value_Definition: Eastern Hayfork subterrane limestone
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: ehsp
Enumerated_Domain_Value_Definition: Eastern Hayfork subterrane serpentinite
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: fc
Enumerated_Domain_Value_Definition: False Cape Terrane
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: gs
Enumerated_Domain_Value_Definition: Greenstone found in the central belt
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: krb
Enumerated_Domain_Value_Definition: Basalt in the sandstone and argillite of King Peak
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: krc
Enumerated_Domain_Value_Definition: Chert in the sandstone and argillite of King Peak
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: krk1
Enumerated_Domain_Value_Definition: Subunit of the sandstone and argillite of King Peak
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: krk2
Enumerated_Domain_Value_Definition: Subunit of the sandstone and argillite of King Peak
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: krk3
Enumerated_Domain_Value_Definition: Subunit of the sandstone and argillite of King Peak
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: krl
Enumerated_Domain_Value_Definition: Limestone in the sandstone and argillite of King Peak
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: m
Enumerated_Domain_Value_Definition: Undivided blueschist blocks
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: mb
Enumerated_Domain_Value_Definition: Chinquapin metabasalt member in the eastern belt
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: mv
Enumerated_Domain_Value_Definition: Metabasalt and minor metachert-glaucophane bearing
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: ppsm
Enumerated_Domain_Value_Definition: South Fork Mountain Schist
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: ppv
Enumerated_Domain_Value_Definition: Valentine Springs Formation
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: rcc
Enumerated_Domain_Value_Definition: Radiolarian chert in the Rattlesnake Creek Terrane
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: rcic
Enumerated_Domain_Value_Definition: Intrusive complex in the Rattlesnake Creek Terrane
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: rcis
Enumerated_Domain_Value_Definition:
Intermediate to silicic volcanic rocks in the Rattlesnake Creek Terrane
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: rcls
Enumerated_Domain_Value_Definition: Limestone in the Rattlesnake Creek Terrane
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: rcm
Enumerated_Domain_Value_Definition: Melange in the Rattlesnake Creek Terrane
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: rcp
Enumerated_Domain_Value_Definition: Plutonic rocks in the Rattlesnake Creek Terrane
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: rcpd
Enumerated_Domain_Value_Definition: Blocky peridotite in the Rattlesnake Creek Terrane
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: rcum
Enumerated_Domain_Value_Definition: Ultramafic rocks in the Rattlesnake Creek Terrane
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: sp
Enumerated_Domain_Value_Definition: Serpentinite
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: srgb
Enumerated_Domain_Value_Definition: Glen Creek Gabbro-ultramafic complex
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: srpd
Enumerated_Domain_Value_Definition: Serpentinized peridotite
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: srs
Enumerated_Domain_Value_Definition: Galice? Formation
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: srv
Enumerated_Domain_Value_Definition: Pyroclastic andesite
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: water
Enumerated_Domain_Value_Definition: water
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: whji
Enumerated_Domain_Value_Definition: Diorite and gabbro plutons
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: whu
Enumerated_Domain_Value_Definition: Hayfork Bally meta-andesite, undivided
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: whwg
Enumerated_Domain_Value_Definition: Wildwood pluton
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: whwp
Enumerated_Domain_Value_Definition: Clinopyroxenite
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: y1
Enumerated_Domain_Value_Definition: Subunit of the Yager Terrane
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: y2
Enumerated_Domain_Value_Definition: Subunit of the Yager Terrane
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: y3
Enumerated_Domain_Value_Definition: Subunit of the Yager Terrane
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: yb
Enumerated_Domain_Value_Definition: Metasandstone of the Yolla Bolly Terrane
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: ybc
Enumerated_Domain_Value_Definition: Chicago Rock melange
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: ybd
Enumerated_Domain_Value_Definition: Devils Hole Ridge Broken Formation
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: ybh
Enumerated_Domain_Value_Definition: Metagreywacke of Hammerhorn Ridge
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: ybi
Enumerated_Domain_Value_Definition: Little Indian Valley argillite
Detailed_Description:
Entity_Type:
Entity_Type_Label: CEGH-GEO.AAT
Entity_Type_Definition: Attribute table of CEGH-GEO.
Entity_Type_Definition_Source: ARC/INFO
Attribute:
Attribute_Label: LTYPE
Attribute_Definition:
Type of geologic or geographic feature denoted by a line in the database.
Attribute_Definition_Source: author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: 1906
Enumerated_Domain_Value_Definition:
San Andreas fault 1906 earthquake rupture. Structural boundary between mapped units or structural discontinuity within a mapped unit, that experienced relative right-lateral offset or surface rupturing in the San Francsico earthquake of 1906. Boundary mapped by F. Matthes.
Enumerated_Domain_Value_Definition_Source:
Lawson, 1908; discussed in Prentice and others, 1999, re-investigated by Prentice and others, 1999
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: 1906, inferred, queried
Enumerated_Domain_Value_Definition:
San Andreas fault 1906 earthquake rupture. Structural boundary between mapped units or structural discontinuity within a mapped unit, that experienced relative right-lateral offset or surface rupturing in the San Francsico earthquake of 1906. Boundary mapped by F. Mattles. The fault rupture has not been observed, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 10 mm at map scale (1:100,000) or within about 1000 meters on the ground. The existence of the contact is inferred from structural and stratigraphic relationships observed elsewhere.
Enumerated_Domain_Value_Definition_Source:
Lawson, 1908; discussed in Prentice and others, 1999, re-investigated by Prentice and others, 1999
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: contact, approx. located
Enumerated_Domain_Value_Definition:
Boundary between two mapped units that retains the original depositional or intrusive relationship (i.e. not faulted). The contact has not been observed, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 2 mm at map scale (1:100,000) or within about 200 meters on the ground.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: contact, certain
Enumerated_Domain_Value_Definition:
Boundary between two mapped units that retains the original depositional or intrusive relationship (i.e. not faulted). The contact has been observed or is closely constrained, so it is well-located as described in Positional_Accuracy.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: contact, concealed
Enumerated_Domain_Value_Definition:
Boundary between two mapped units that retains the original depositional or intrusive relationship (i.e. not faulted). The contact is obscured by overlying mapped units, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 5 mm at map scale (1:100,000) or within about 500 meters on the ground.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: contact, inferred
Enumerated_Domain_Value_Definition:
Boundary between two mapped units that retains the original depositional or intrusive relationship (i.e. not faulted). The contact has not been observed, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 5 mm at map scale (1:100,000) or within about 500 meters on the ground. The existence of the contact is inferred from structural and stratigraphic relationships observed elsewhere.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: contact, inferred, queried
Enumerated_Domain_Value_Definition:
Boundary between two mapped units that retains the original depositional or intrusive relationship (i.e. not faulted). The contact has not been observed, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 10 mm at map scale (1:100,000) or within about 1000 meters on the ground. The existence of the contact is inferred from structural and stratigraphic relationships observed elsewhere.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: fault, approx. located
Enumerated_Domain_Value_Definition:
Structural boundary between mapped units or structural discontinuity within a mapped unit that has experienced relative offset between the rock bodies on either side of the fault. The contact has not been observed, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 2 mm at map scale (1:100,000) or within about 200 meters on the ground.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: fault, certain
Enumerated_Domain_Value_Definition:
Structural boundary between mapped units or structural discontinuity within a mapped unit that has experienced relative offset between the rock bodies on either side of the fault. The fault has been observed or is closely constrained, so it is well-located as described in Positional_Accuracy.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: fault, concealed
Enumerated_Domain_Value_Definition:
Structural boundary between mapped units or structural discontinuity within a mapped unit that has experienced relative offset between the rock bodies on either side of the fault. The fault is obscured by overlying mapped units, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 5 mm at map scale (1:100,000) or within about 500 meters on the ground.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: fault, concealed, queried
Enumerated_Domain_Value_Definition:
Structural boundary between mapped units or structural discontinuity within a mapped unit that has experienced relative offset between the rock bodies on either side of the fault. The fault is obscured by overlying mapped units, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 10 mm at map scale (1:100,000) or within about 1000 meters on the ground.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: fault, inferred
Enumerated_Domain_Value_Definition:
Structural boundary between mapped units or structural discontinuity within a mapped unit that has experienced relative offset between the rock bodies on either side of the fault. The fault has not been observed, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 5 mm at map scale (1:100,000) or within about 500 meters on the ground. The existence of the fault is inferred from structural and stratigraphic relationships observed elsewhere.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: fault, inferred, queried
Enumerated_Domain_Value_Definition:
Structural boundary between mapped units or structural discontinuity within a mapped unit that has experienced relative offset between the rock bodies on either side of the fault. The fault has not been observed, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 10 mm at map scale (1:100,000) or within about 1000 meters on the ground. The existence of the fault is inferred from structural and stratigraphic relationships observed elsewhere.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: map boundary,
Enumerated_Domain_Value_Definition:
Edge of the mapped area. Used primarily to bound polygons at the edge of the map database. The location of the boundary is well located as described in Positional_Accuracy
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: photo lineament
Enumerated_Domain_Value_Definition:
Linear physiographic feature, delineated by alignment of topographic features, ie offsets or alignments of drainages, gullys, ridges, valley fronts, scarps or steps in topography. They are generally delineated from aerial photographs. They are inferred to be related to faulting, although are seldom checked in the field.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: reverse fault, approx. located
Enumerated_Domain_Value_Definition:
Structural boundary between mapped units or structural discontinuity within a mapped unit that has experienced reverse offset between the rock bodies on either side of the fault. The contact has not been observed, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 2 mm at map scale (1:100,000) or within about 200 meters on the ground.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: reverse fault, certain
Enumerated_Domain_Value_Definition:
Structural boundary between mapped units or structural discontinuity within a mapped unit that has experienced reverse offset between the rock bodies on either side of the fault. The fault has been observed or is closely constrained, so it is well-located as described in Positional_Accuracy.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: reverse fault, concealed
Enumerated_Domain_Value_Definition:
Structural boundary between mapped units or structural discontinuity within a mapped unit that has experienced reverse offset between the rock bodies on either side of the fault. The fault is obscured by overlying mapped units, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 5 mm at map scale (1:100,000) or within about 500 meters on the ground.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: normal fault, certain
Enumerated_Domain_Value_Definition:
Structural boundary between mapped units or structural discontinuity within a mapped unit that has experienced normal offset between the rock bodies on either side of the fault. The fault has been observed or is closely constrained, so it is well-located as described in Positional_Accuracy.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: normal fault, inferred, queried
Enumerated_Domain_Value_Definition:
Structural boundary between mapped units or structural discontinuity within a mapped unit that has experienced normal offset between the rock bodies on either side of the fault. The fault has not been observed, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 10 mm at map scale (1:100,000) or within about 1000 meters on the ground. The existence of the fault is inferred from structural and stratigraphic relationships observed elsewhere.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: scratch boundary, certain
Enumerated_Domain_Value_Definition:
An arbitrary line with no geologic or geographic significance. Used primarily to divide polygons that would otherwise have more vertices than allowed by Arc/Info.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: s.s. fault, r.l., certain
Enumerated_Domain_Value_Definition:
Structural boundary between mapped units or structural discontinuity within a mapped unit that has experienced dextral offset between the rock bodies on either side of the fault. The fault has been observed or is closely constrained, so it is well-located as described in Positional_Accuracy.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: s.s. fault, r.l., approx. located
Enumerated_Domain_Value_Definition:
Structural boundary between mapped units or structural discontinuity within a mapped unit that has experienced dextral offset between the rock bodies on either side of the fault. The fault has not been observed, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 2 mm at map scale (1:100,000) or within about 200 meters on the ground.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: s.s. fault, r.l., concealed
Enumerated_Domain_Value_Definition:
Structural boundary between mapped units or structural discontinuity within a mapped unit that has experienced dextral offset between the rock bodies on either side of the fault. The fault is obscured by overlying mapped units, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 5 mm at map scale (1:100,000) or within about 500 meters on the ground.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: s.s. fault, r.l., inferred, queried
Enumerated_Domain_Value_Definition:
Structural boundary between mapped units or structural discontinuity within a mapped unit that has experienced dextral offset between the rock bodies on either side of the fault. The fault has not been observed, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 10 mm at map scale (1:100,000) or within about 1000 meters on the ground.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: thrust fault, approx. located
Enumerated_Domain_Value_Definition:
Structural boundary between mapped units or structural discontinuity within a mapped unit that has experienced thrust offset between the rock bodies on either side of the fault. The contact has not been observed, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 2 mm at map scale (1:100,000) or within about 200 meters on the ground.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: thrust fault, certain
Enumerated_Domain_Value_Definition:
Structural boundary between mapped units or structural discontinuity within a mapped unit that has experienced thrust offset between the rock bodies on either side of the fault. The fault has been observed or is closely constrained, so it is well-located as described in Positional_Accuracy.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: thrust fault, concealed
Enumerated_Domain_Value_Definition:
Structural boundary between mapped units or structural discontinuity within a mapped unit that has experienced thrust offset between the rock bodies on either side of the fault. The fault is obscured by overlying mapped units, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 5 mm at map scale (1:100,000) or within about 500 meters on the ground.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: thrust fault, concealed, queried
Enumerated_Domain_Value_Definition:
Structural boundary between mapped units or structural discontinuity within a mapped unit that has experienced thrust offset between the rock bodies on either side of the fault. The fault is obscured by overlying mapped units, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 10 mm at map scale (1:100,000) or within about 1000 meters on the ground. The existence of this fault has been inferred from probable stratigraphic and structural relationships observed at a regional scale.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: thrust fault, inferred
Enumerated_Domain_Value_Definition:
Structural boundary between mapped units or structural discontinuity within a mapped unit that has experienced thrust offset between the rock bodies on either side of the fault. The fault has not been observed, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 5 mm at map scale (1:100,000) or within about 500 meters on the ground. The existence of the fault is inferred from structural and stratigraphic relationships observed elsewhere.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: thrust fault, inferred, queried
Enumerated_Domain_Value_Definition:
Structural boundary between mapped units or structural discontinuity within a mapped unit that has experienced thrust offset between the rock bodies on either side of the fault. The fault has not been observed, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 10 mm at map scale (1:100,000) or within about 1000 meters on the ground. The existence of the fault is inferred from structural and stratigraphic relationships observed elsewhere.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: water boundary
Enumerated_Domain_Value_Definition:
The edge of a mapped body of water. This line is derived from the base map, and therefore is well-located as described in Positional_Accuracy.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: water boundary,
Enumerated_Domain_Value_Definition:
The edge of a mapped body of water. This line is derived from the base map, and therefore is well-located as described in Positional_Accuracy.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: water boundary, certain
Enumerated_Domain_Value_Definition:
The edge of a mapped body of water. This line is derived from the base map, and therefore is well-located as described in Positional_Accuracy.
Detailed_Description:
Entity_Type:
Entity_Type_Label: CEGH-STR.PAT
Entity_Type_Definition: Attribute table of CEGH-STR.
Entity_Type_Definition_Source: ARC/INFO
Attribute:
Attribute_Label: PTTYPE
Attribute_Definition:
The type of planar feature which was observed and the orientation of which was measured at this point.
Attribute_Definition_Source: author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: approx. bedding
Enumerated_Domain_Value_Definition:
Originally horizontal sedimentary layers were observed at this point. Because of poor exposure, weathering, indistinct layering, or some other factor, only the approximate orientation of the layers was measured.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: bedding
Enumerated_Domain_Value_Definition:
Originally horizontal sedimentary layers were observed at this point.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: bedding w/tops
Enumerated_Domain_Value_Definition:
Originally horizontal sedimentary layers were observed at this point. In addition, a geopedal indicator was observed that showed the beds were upright.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: ot bedding w/tops
Enumerated_Domain_Value_Definition:
Originally horizontal sedimentary layers were observed at this point. In addition, a geopedal indicator was observed that showed the beds were overturned.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: flat bedding
Enumerated_Domain_Value_Definition:
Sedimentary layers that retain their original horizontal position were observed at this point.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: foliation
Enumerated_Domain_Value_Definition: Metamorphic foliation was observed at this point.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: ot bedding
Enumerated_Domain_Value_Definition:
Originally horizontal sedimentary layers were observed at this point. Evidence that the beds are overturned was observed, although that observation may not have been made at this point.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: vert bedding
Enumerated_Domain_Value_Definition:
Originally horizontal sedimentary layers were observed at this point. These layers are now vertical.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: vert foliation
Enumerated_Domain_Value_Definition:
Foliation due to shearing or metamorhpism was observed at this point. This foliation is vertical.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: horz foliation
Enumerated_Domain_Value_Definition:
Foliation due to shearing or metamorhpism was observed at this point. This foliation is horizontal.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: vert bedding w/tops
Enumerated_Domain_Value_Definition:
Originally horizontal sedimentary layers were observed at this point. In addition, a geopedal indicator was observed that showed the beds were upright. These layers are now vertical.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: inclined cleavage
Enumerated_Domain_Value_Definition:
Closely-spaced, sub-parallel planar structures in metamorphic rock, non-horizontal and non-vertical, produced by deformation or metamorphism were observed here.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: joint
Enumerated_Domain_Value_Definition:
Surface of fracture or parting, with no displacement, was observed here.
Attribute:
Attribute_Label: DIP
Attribute_Definition:
The inclination of planar structures measured in degrees down from horizontal.
Attribute_Definition_Source: author
Attribute_Domain_Values:
Range_Domain:
Range_Domain_Minimum: 0
Range_Domain_Maximum: 90
Attribute_Units_of_Measure: degrees
Attribute_Measurement_Resolution: 1
Attribute:
Attribute_Label: STRIKE
Attribute_Definition:
The orientation of a horizontal line in an inclined planar structure measured in degrees clockwise from north.
Attribute_Definition_Source: author
Attribute_Domain_Values:
Range_Domain:
Range_Domain_Minimum: 0
Range_Domain_Maximum: 359
Attribute_Units_of_Measure: degrees
Attribute_Measurement_Resolution: 1
Detailed_Description:
Entity_Type:
Entity_Type_Label: CEGH-STR.AAT
Entity_Type_Definition: Attribute table of CEGH-STR.
Entity_Type_Definition_Source: ARC/INFO
Attribute:
Attribute_Label: LTYPE
Attribute_Definition:
The type of fold axis or other structural linear feature that does not bound geologic units. Faults and contacts are described in a separate coverage.
Attribute_Definition_Source: author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: f.a., anticline, approx. located
Enumerated_Domain_Value_Definition:
The surface trace of the axis of an anticline. The axis has not been observed, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 2 mm at map scale (1:100,000) or within about 200 meters on the ground.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: f.a., anticline, certain
Enumerated_Domain_Value_Definition:
The surface trace of the axis of an anticline. The axis has been observed or is closely constrained, so it is well-located as described in Positional_Accuracy.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: f.a., anticline, inferred, queried
Enumerated_Domain_Value_Definition:
The surface trace of the axis of an anticline. The axis has not been observed, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 10 mm at map scale (1:100,000) or within about 1000 meters on the ground. The existence of the fold is inferred from structural and stratigraphic relationships observed elsewhere.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: f.a., syncline, approx. located
Enumerated_Domain_Value_Definition:
The surface trace of the axis of a syncline. The axis has not been observed, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 2 mm at map scale (1:100,000) or within about 200 meters on the ground.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: f.a., syncline, certain
Enumerated_Domain_Value_Definition:
The surface trace of the axis of a syncline. The axis has been observed or is closely constrained, so it is well-located as described in Positional_Accuracy.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: f.a., syncline, inferred, queried
Enumerated_Domain_Value_Definition:
The surface trace of the axis of a syncline. The axis has not been observed, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 10 mm at map scale (1:100,000) or within about 1000 meters on the ground. The existence of the fold is inferred from structural and stratigraphic relationships observed elsewhere.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: f.a., ot syncline, certain
Enumerated_Domain_Value_Definition:
The surface trace of the axis of a syncline. The axis has been observed or is closely constrained, so it is well-located as described in Positional_Accuracy. Evidence that the syncline is overturned was observed, although that observation may not have been made at this point.
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: f.a., ot syncline, approx. located
Enumerated_Domain_Value_Definition:
The surface trace of the axis of a syncline. The axis has not been observed, so it is not well-located as described in Positional_Accuracy, but the location is constrained to be within about 2 mm at map scale (1:100,000) or within about 200 meters on the ground. Evidence that the syncline is overturned was observed, although that observation may not have been made at this point.
Detailed_Description:
Entity_Type:
Entity_Type_Label: CM-GEO.PAT
Entity_Type_Definition: Attribute table of CM-GEO.
Entity_Type_Definition_Source: ARC/INFO
Attribute:
Attribute_Label: PTYPE
Attribute_Definition:
refer to PTYPE definitions listed under CEGH-GEO.PAT as this file was derived from that one. Therefore, this file might not have every PTYPE listed there, but all PTYPES it does possess will be defined there.
Attribute_Definition_Source: author
Attribute:
Attribute_Label: LTYPE
Attribute_Definition:
refer to LTYPE definitions listed under CEGH-GEO.AAT as this file was derived from that one. Therefore, this file might not have every LTYPE listed there, but all LTYPES it does possess will be defined there.
Attribute_Definition_Source: author
Detailed_Description:
Entity_Type:
Entity_Type_Label: CM-STR.PAT
Entity_Type_Definition: Attribute table of CM-STR.
Entity_Type_Definition_Source: ARC/INFO
Attribute:
Attribute_Label: PTTYPE
Attribute_Definition:
refer to PTTYPE definitions listed under CEGH-STR.PAT as this file was derived from that one. Therefore, this file might not have every PTYPE listed there, but all PTTYPES it does possess will be defined there.
Attribute_Definition_Source: author
Attribute:
Attribute_Label: DIP
Attribute_Definition:
The inclination of planar structures measured in degrees down from horizontal.
Attribute_Definition_Source: author
Attribute_Domain_Values:
Range_Domain:
Range_Domain_Minimum: 0
Range_Domain_Maximum: 90
Attribute_Units_of_Measure: degrees
Attribute_Measurement_Resolution: 1
Attribute:
Attribute_Label: STRIKE
Attribute_Definition:
The orientation of a horizontal line in an inclined planar structure measured in degrees clockwise from north.
Attribute_Definition_Source: author
Attribute_Domain_Values:
Range_Domain:
Range_Domain_Minimum: 0
Range_Domain_Maximum: 359
Attribute_Units_of_Measure: degrees
Attribute_Measurement_Resolution: 1
Detailed_Description:
Entity_Type:
Entity_Type_Label: CM-STR.AAT
Entity_Type_Definition: Attribute table of CM-STR.
Entity_Type_Definition_Source: ARC/INFO
Attribute:
Attribute_Label: LTYPE
Attribute_Definition:
refer to LTYPE definitions listed under CEGH-STR.AAT as this file was derived from that one. Therefore, this file might not have every LTYPE listed there, but all LTYPES it does possess will be defined there.
Attribute_Definition_Source: author
Detailed_Description:
Entity_Type:
Entity_Type_Label: EU-GEO.PAT
Entity_Type_Definition: Attribute table of EU-GEO.
Entity_Type_Definition_Source: ARC/INFO
Attribute:
Attribute_Label: PTYPE
Attribute_Definition:
refer to PTYPE definitions listed under CEGH-GEO.PAT as this file was derived from that one. Therefore, this file might not have every PTYPE listed there, but all PTYPES it does possess will be defined there.
Attribute_Definition_Source: author
Detailed_Description:
Entity_Type:
Entity_Type_Label: EU-GEO.AAT
Entity_Type_Definition: Attribute table of EU-GEO.
Entity_Type_Definition_Source: ARC/INFO
Attribute:
Attribute_Label: LTYPE
Attribute_Definition:
refer to LTYPE definitions listed under CEGH-GEO.AAT as this file was derived from that one. Therefore, this file might not have every LTYPE listed there, but all LTYPES it does possess will be defined there.
Attribute_Definition_Source: author
Detailed_Description:
Entity_Type:
Entity_Type_Label: EU-STR.PAT
Entity_Type_Definition: Attribute table of EU-STR.
Entity_Type_Definition_Source: ARC/INFO
Attribute:
Attribute_Label: PTTYPE
Attribute_Definition:
refer to PTTYPE definitions listed under CEGH-STR.PAT as this file was derived from that one. Therefore, this file might not have every PTTYPE listed there, but all PTTYPES it does possess will be defined there.
Attribute_Definition_Source: author
Attribute:
Attribute_Label: DIP
Attribute_Definition:
The inclination of planar structures measured in degrees down from horizontal.
Attribute_Definition_Source: author
Attribute_Domain_Values:
Range_Domain:
Range_Domain_Minimum: 0
Range_Domain_Maximum: 90
Attribute_Units_of_Measure: degrees
Attribute_Measurement_Resolution: 1
Attribute:
Attribute_Label: STRIKE
Attribute_Definition:
The orientation of a horizontal line in an inclined planar structure measured in degrees clockwise from north.
Attribute_Definition_Source: author
Attribute_Domain_Values:
Range_Domain:
Range_Domain_Minimum: 0
Range_Domain_Maximum: 359
Attribute_Units_of_Measure: degrees
Attribute_Measurement_Resolution: 1
Detailed_Description:
Entity_Type:
Entity_Type_Label: EU-STR.AAT
Entity_Type_Definition: Attribute table of EU-STR.
Entity_Type_Definition_Source: ARC/INFO
Attribute:
Attribute_Label: LTYPE
Attribute_Definition:
refer to LTYPE definitions listed under CEGH-STR.AAT as this file was derived from that one. Therefore, this file might not have every LTYPE listed there, but all LTYPES it does possess will be defined there.
Attribute_Definition_Source: author
Detailed_Description:
Entity_Type:
Entity_Type_Label: GA-GEO.PAT
Entity_Type_Definition: Attribute table of GA-GEO.
Entity_Type_Definition_Source: ARC/INFO
Attribute:
Attribute_Label: PTYPE
Attribute_Definition:
refer to PTYPE definitions listed under CEGH-GEO.PAT as this file was derived from that one. Therefore, this file might not have every PTYPE listed there, but all PTYPES it does possess will be defined there.
Attribute_Definition_Source: author
Detailed_Description:
Entity_Type:
Entity_Type_Label: GA-GEO.AAT
Entity_Type_Definition: Attribute table of GA-GEO.
Entity_Type_Definition_Source: ARC/INFO
Attribute:
Attribute_Label: LTYPE
Attribute_Definition:
refer to LTYPE definitions listed under CEGH-GEO.AAT as this file was derived from that one. Therefore, this file might not have every LTYPE listed there, but all LTYPES it does possess will be defined there.
Attribute_Definition_Source: author
Detailed_Description:
Entity_Type:
Entity_Type_Label: GA-STR.PAT
Entity_Type_Definition: Attribute table of GA-STR.
Entity_Type_Definition_Source: ARC/INFO
Attribute:
Attribute_Label: PTTYPE
Attribute_Definition:
refer to PTTYPE definitions listed under CEGH-STR.PAT as this file was derived from that one. Therefore, this file might not have every PTTYPE listed there, but all PTTYPES it does possess will be defined there.
Attribute_Definition_Source: author
Attribute:
Attribute_Label: DIP
Attribute_Definition:
The inclination of planar structures measured in degrees down from horizontal.
Attribute_Definition_Source: author
Attribute_Domain_Values:
Range_Domain:
Range_Domain_Minimum: 0
Range_Domain_Maximum: 90
Attribute_Units_of_Measure: degrees
Attribute_Measurement_Resolution: 1
Attribute:
Attribute_Label: STRIKE
Attribute_Definition:
The orientation of a horizontal line in an inclined planar structure measured in degrees clockwise from north.
Attribute_Definition_Source: author
Attribute_Domain_Values:
Range_Domain:
Range_Domain_Minimum: 0
Range_Domain_Maximum: 359
Attribute_Units_of_Measure: degrees
Attribute_Measurement_Resolution: 1
Detailed_Description:
Entity_Type:
Entity_Type_Label: GA-STR.AAT
Entity_Type_Definition: Attribute table of GA-STR.
Entity_Type_Definition_Source: ARC/INFO
Attribute:
Attribute_Label: LTYPE
Attribute_Definition:
refer to LTYPE definitions listed under CEGH-STR.AAT as this file was derived from that one. Therefore, this file might not have every LTYPE listed there, but all LTYPES it does possess will be defined there.
Attribute_Definition_Source: author
Detailed_Description:
Entity_Type:
Entity_Type_Label: HA-GEO.PAT
Entity_Type_Definition: Attribute table of HA-GEO.
Entity_Type_Definition_Source: ARC/INFO
Attribute:
Attribute_Label: PTYPE
Attribute_Definition:
refer to PTYPE definitions listed under CEGH-GEO.PAT as this file was derived from that one. Therefore, this file might not have every PTYPE listed there, but all PTYPES it does possess will be defined there.
Attribute_Definition_Source: author
Detailed_Description:
Entity_Type:
Entity_Type_Label: HA-GEO.AAT
Entity_Type_Definition: Attribute table of HA-GEO.
Entity_Type_Definition_Source: ARC/INFO
Attribute:
Attribute_Label: LTYPE
Attribute_Definition:
refer to LTYPE definitions listed under CEGH-GEO.AAT as this file was derived from that one. Therefore, this file might not have every LTYPE listed there, but all LTYPES it does possess will be defined there.
Attribute_Definition_Source: author
Detailed_Description:
Entity_Type:
Entity_Type_Label: CM-BLKS.PAT
Entity_Type_Definition: Attribute table of CM-BLKS.
Entity_Type_Definition_Source: ARC/INFO
Attribute:
Attribute_Label: PTTYPE
Attribute_Definition: melange block
Attribute_Definition_Source: author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: melange block
Enumerated_Domain_Value_Definition: melange block
Attribute:
Attribute_Label: SAMPNO
Attribute:
Attribute_Label: BKTYPE
Attribute_Definition: melange block
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: bs
Enumerated_Domain_Value_Definition: blueschist block
Detailed_Description:
Entity_Type:
Entity_Type_Label: CM-FOS.PAT
Entity_Type_Definition: Attribute table of CM-FOS.
Entity_Type_Definition_Source: ARC/INFO
Attribute:
Attribute_Label: PTTYPE
Attribute_Definition: fossil locality
Attribute_Definition_Source: author
Attribute:
Attribute_Label: SAMPNO
Attribute_Definition:
sample number correlated to an index table which describes the fossil type, age, collector etc.. Table 1 on Sheet 5
Attribute_Definition_Source: author
Attribute_Domain_Values:
Range_Domain:
Range_Domain_Minimum: 1
Range_Domain_Maximum: 81
Attribute_Units_of_Measure: arbitrary sample number
Attribute_Measurement_Resolution: 1
Detailed_Description:
Entity_Type:
Entity_Type_Label: CM-KSP.PAT
Entity_Type_Definition: Attribute table of CM-KSP.
Entity_Type_Definition_Source: ARC/INFO
Attribute:
Attribute_Label: PTTYPE
Attribute_Definition: K-feldspar sample locality
Attribute_Definition_Source: author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: K-feldspar sample locality
Enumerated_Domain_Value_Definition: K-feldspar sample locality
Attribute:
Attribute_Label: KSPAR
Attribute_Definition:
percentage of K-feldspar measured from a sample taken at this locality. Note: a value of '0.01' represents a value of 'trace' amount K-feldspar.
Attribute_Definition_Source: author
Attribute_Domain_Values:
Range_Domain:
Range_Domain_Minimum: 0
Range_Domain_Maximum: 99.99
Attribute_Units_of_Measure: percent
Attribute_Measurement_Resolution: 0.01
Attribute:
Attribute_Label: SAMPNO
Attribute_Definition_Source: ARC/INFO
Detailed_Description:
Entity_Type:
Entity_Type_Label: EU-FOS.PAT
Entity_Type_Definition: Attribute table of EU-FOS.
Entity_Type_Definition_Source: ARC/INFO
Attribute:
Attribute_Label: PTTYPE
Attribute_Definition: fossil locality
Attribute_Definition_Source: author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: fossil locality
Enumerated_Domain_Value_Definition: fossil locality
Attribute:
Attribute_Label: SAMPNO
Attribute_Definition:
sample number correlated to an index table which describes the fossil type, age, collector etc.. Table 1 on Sheet 5
Attribute_Definition_Source: author
Attribute_Domain_Values:
Range_Domain:
Range_Domain_Minimum: 1
Range_Domain_Maximum: 81
Attribute_Units_of_Measure: arbitrary sample number
Attribute_Measurement_Resolution: 1
Detailed_Description:
Entity_Type:
Entity_Type_Label: GAR-FOS.PAT
Entity_Type_Definition: Attribute table of GAR-FOS.
Entity_Type_Definition_Source: ARC/INFO
Attribute:
Attribute_Label: PTTYPE
Attribute_Definition: fossil locality
Attribute_Definition_Source: author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: fossil locality
Enumerated_Domain_Value_Definition: fossil locality
Attribute:
Attribute_Label: SAMPNO
Attribute_Definition:
sample number correlated to an index table which describes the fossil type, age, collector etc.. Table 1 on Sheet 5
Attribute_Definition_Source: author
Attribute_Domain_Values:
Range_Domain:
Range_Domain_Minimum: 1
Range_Domain_Maximum: 81
Attribute_Units_of_Measure: arbitrary sample number
Attribute_Measurement_Resolution: 1
Detailed_Description:
Entity_Type:
Entity_Type_Label: GAR-KSP.PAT
Entity_Type_Definition: Attribute table of GAR-KSP.
Entity_Type_Definition_Source: ARC/INFO
Attribute:
Attribute_Label: PTTYPE
Attribute_Definition: K-feldspar sample locality
Attribute_Definition_Source: author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: K-feldspar sample locality
Enumerated_Domain_Value_Definition: K-feldspar sample locality
Attribute:
Attribute_Label: KSPAR
Attribute_Definition:
percentage of K-feldspar measured from a sample taken at this locality. Note: a value of '0.01' represents a value of 'trace' amount K-feldspar.
Attribute_Definition_Source: author
Attribute_Domain_Values:
Range_Domain:
Range_Domain_Minimum: 0
Range_Domain_Maximum: 99.99
Attribute_Units_of_Measure: percent
Attribute_Measurement_Resolution: 0.01
Attribute:
Attribute_Label: SAMPNO
Detailed_Description:
Entity_Type:
Entity_Type_Label: GAR-BLKS.PAT
Entity_Type_Definition: Attribute table of GAR-BLKS.
Entity_Type_Definition_Source: ARC/INFO
Attribute:
Attribute_Label: PTTYPE
Attribute_Definition: melange block
Attribute_Definition_Source: author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: melange block
Enumerated_Domain_Value_Definition: melange block
Attribute:
Attribute_Label: BKTYPE
Attribute_Definition: melange block type
Attribute_Definition_Source: author
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: bs
Enumerated_Domain_Value_Definition: blueschist block
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: ch
Enumerated_Domain_Value_Definition: chert block
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: gs
Enumerated_Domain_Value_Definition: greenstone block
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: sp
Enumerated_Domain_Value_Definition: serpentinite block
Attribute:
Attribute_Label: SAMPNO
Overview_Description:
Entity_and_Attribute_Overview:
The databases in this report were compiled in ARC/INFO, a commercial Geographic Information System (Environmental Systems Research Institute, Redlands, California). Almost all the attributes in the various attribute tables of the coverages included in the report are set or calculated by Arc/Info. The exceptions are "coveragename"-ID, LTYPE, PTYPE, PTTYPE, BKTYPE, SAMPNO, STRIKE, and DIP. "coveragename"-ID is required by internal policy to be sequential. This ensures the highest compatibility of our databases with other GISs. Therefore "coveragename"-ID is calculated equal to "coveragename"#, which is a unique, sequential integer assigned by Arc/Info to each data record. LTYPE, PTYPE, BKTYPE, and PTTYPE are author added items to the coverage AAT or PAT that are used to describe the type of line (LTYPE), area ( PTYPE), block type (BKTYPE) or point (PTTYPE) being recorded. All coverages with AAT and PAT present include these items in the data structure, although in some cases these items are not used (see above). Each has WIDTH 35, OUTPUT 35, TYPE C, except BKTYPE which has WIDTH 6, OUTPUT 6, TYPE C. STRIKE and DIP are author added items to the coverage PAT that record information about the orientation of planar geologic structures. Both have WIDTH 3, OUTPUT 3, TYPE I. These items are recorded in the tables XX-STR.PAT of the structure coverages. KSPAR is an author added item that only the table GAR-BLKS.PAT has that records information about the percentage of K-feldspar collected at specific localities in the map area. It has WIDTH 35, OUTPUT 35, TYPE C. The base map layers are included for visual reference only and contain no data attributes or attribute tables.
Entity_and_Attribute_Detail_Citation:
This report combined with the explanatory pamphlet or pamphlets: ceghmf and ceghmfdb.

Distribution_Information:
Distributor:
Contact_Information:
Contact_Person_Primary:
Contact_Person: Database Coordinator
Contact_Organization: U.S. Geological Survey
Contact_Address:
Address_Type: mailing address
Address: 345 Middlefield Rd., M/S 975
City: Menlo Park
State_or_Province: CA
Postal_Code: 94025
Country: USA
Contact_Instructions:
Please contact by mail. For digital packages on Exabyte tape, send a tape with your request. Please specify which data package you are requesting (PostScript plotfiles package m2336ps.tgz, PDF plotfiles package m2336pdf.tgz, or Arc/Info database package m2336db.tgz)
Resource_Description:
USGS Miscellaneous Field Studies Report MF-2336 consists of both traditional geologic map products and Arc/Info format geospatial databases. Furthermore, the traditional geologic map products (map sheets and pamphlets) can be obtained either as paper or as digital plot files.
Distribution_Liability:
Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government. Although this publication has been subjected to rigorous review and is substantially complete, the USGS reserves the right to revise the data pursuant to further analysis and review. Furthermore, it is released on condition that neither the USGS nor the United States Government may be held liable for any damages resulting from its authorized or unauthorized use.
Standard_Order_Process:
Digital_Form:
Digital_Transfer_Information:
Format_Name: PostScript
Format_Version_Number: 1.0
Format_Specification:
PostScript files generated by Arc/Info v. 7.2.1 (PS-Adobe-2.0 EPSF-1.2)
Format_Information_Content:
8 PostScript plotfiles, one for each map sheet, the composite map, one for the pamphlet, one for this database pamphlet, and two for the explanation sheets.
File_Decompression_Technique: unzip
Digital_Transfer_Option:
Online_Option:
Computer_Contact_Information:
Network_Address:
Network_Resource_Name: http://pubs.usgs.gov/mf/2000/2336/mf2336ps.zip
Offline_Option:
Offline_Media: 8 mm Exabyte tape, 2.3 GB or 5.0 GB
Recording_Format: TAR file compressed with gzip
Compatibility_Information:
Send a request with an Exabyte tape to the Database Coordinator via the contact information given above. Specify the PostScript package (m2336ps.tgz).
Digital_Form:
Digital_Transfer_Information:
Format_Name: PDF
Format_Version_Number: 1.0
Format_Specification: Adobe Acrobat PDF files, v. 3.0
Format_Information_Content:
8 PDF (Adobe Acrobat) plotfiles, one for each map sheet, the composite map, one for the pamphlet, one for this database pamphlet, and two for the explanation sheets.
File_Decompression_Technique: unzip
Digital_Transfer_Option:
Online_Option:
Computer_Contact_Information:
Network_Address:
Network_Resource_Name: http://pubs.usgs.gov/mf/2000/2336/mf2336pdf.zip
Offline_Option:
Offline_Media: 8 mm Exabyte tape, 2.3 GB or 5.0 GB
Recording_Format: TAR file compressed with gzip
Compatibility_Information:
Send a request with an Exabyte tape to the Database Coordinator via the contact information given above. Specify the PDF package (m2336pdf.tgz).
Digital_Form:
Digital_Transfer_Information:
Format_Name: ARCE
Format_Version_Number: 7.2.1
Format_Specification: ARCE
Format_Information_Content:
18 Arc/Info export (.e00) files, along with supporting pamphlet plotfiles, revisions list, metadata (this file), and import AML. See the db pamphlet (ceghmfdb.ps, ceghmfdb.pdf, ceghmfdb.txt) or above for more information about the content of the digital database.
File_Decompression_Technique: unzip
Digital_Transfer_Option:
Online_Option:
Computer_Contact_Information:
Network_Address:
Network_Resource_Name: http://pubs.usgs.gov/mf/2000/2336/mf2336db.zip
Fees: none
Metadata_Reference_Information:
Metadata_Date: 20160613
Metadata_Contact:
Contact_Information:
Contact_Person_Primary:
Contact_Person: Peter N Schweitzer
Contact_Organization: USGS Midwest Area
Contact_Position:
Collection manager, USGS Geoscience Data Clearinghouse, http://geo-nsdi.er.usgs.gov/
Contact_Address:
Address_Type: mailing address
Address:
Mail Stop 954
12201 Sunrise Valley Dr
City: Reston
State_or_Province: VA
Postal_Code: 20192-0002
Country: USA
Contact_Voice_Telephone: 703-648-6533
Contact_Facsimile_Telephone: 703-648-6252
Contact_Electronic_Mail_Address: pschweitzer@usgs.gov
Metadata_Standard_Name: Content Standard for Digital Geospatial Metadata
Metadata_Standard_Version: FGDC-STD-001-1998
This page is <https://geo-nsdi.er.usgs.gov/metadata/map-mf/2336/metadata.html>
Generated by mp version 2.9.48 on Tue Jul 03 20:05:01 2018